Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Priliminary Research On Behavior Of Composite Joints With Cfst Column To Steel Beam Under Long-Term Loading

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Research on Behavior of the Joint with Concrete-filled Steel Tubular Column Under Pre-load in Steel Tube

Behaviour of Composite Joints with Concrete Encased Cfst Columns under Cyclic Loading: Experiments

Numerical Investigation on Compressive Performance of CFST Columns with Encased Built-Up Lattice-Angles

Numerical Analysis on Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns under Axial Compression

Study on shear capacity of prestressed composite joints with concrete-encased CFST columns

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Finite Element Analysis on Behavior of the Joint with Steel Tube Confined Concrete (STCC) Column to Reinforced Concrete Beam

Seismic Performance of the Concrete-Encased CFST Column to RC Beam Joints: Analytical Study

Behavior of Rectangular CFST Axial Compressive Stub Column under Long-term Loading

FINITE ELEMENT ANALYSIS ON CONCRETE-ENCASED CFST COLUMN TO REINFORCED CONCRETE BEAM JOINTS

Preliminary Research On Fire Resistance Of Concrete-Filled Steel Tubular Columns To Composte Beam Frame

Finite Element Analysis on Behavior of Reinforced Hollow High Strength Concrete Filled Square Steel Tube Short Columns under Axial Compression

Preliminary Research on Effective Length of Concrete Filled Steel Tubular Columns in Sway Frame

MECHANICAL BEHAVIOR AND PARAMETRIC STUDY OF CONCRETE-FILLED STEEL TUBULAR STUB COLUMNS WITH ENCASED PROFILED STEEL UNDER AXAIL COMPRESSION

Behaviour of Concrete-Encased CFST Stub Columns Subjected to Long-Term Sustained Loading

Performance of Concrete-Encased CFST Column-to-beam 3-D Joints under Seismic Loading: Analysis

Performance of circular CFST column to steel beam frames under lateral cyclic loading