Abstract:Manufactured by laser cutting technology with planar steel plates, the plate members have significant advan-tages in efficiency, customization, and transportation. These advantages make the plate members suitable for building small or medium-span curved reticulated shell structures. The plate members have been adopted in a novel reticulated shell structure with stiffening methods for resolving local buckling issues. In this type of structure, the semi-rigid plate-type joints are used to connect plate members. The previous study indicated that the rotational stiffness of plate-type joints has a great impact on structural stability. To investigate the rotational performance of the semi-rigid plate-type joints, a comprehensive study has been conducted in this research. Experimental tests were performed on a total of 12 specimens to obtain the moment-rotation responses of the joints. Four phases of the failure process were observed in the tests, namely, the linear elastic phase, slipping phase, hardening phase, and failure phase. The influences of joint width, joint thickness, and bolt diameter on the rotational performance are revealed by the experiments. Then, a refined finite element (FE) model was built and validated by the experimental results. This validated FE model clarified the failure mechanism of joints from the perspective of stress development and contact condition. Furthermore, theoretical formulas were established to calculate the key characteristics of the moment-rotation response, which is proved to have acceptable accuracy in predicting the rotational performance of joints. The conclusions of this study may provide a valuable reference for the structural stability design of reticulated shell structures composed of plate members.

Numerical and Experimental Research of the Design Method of Plate-Insert Welded Tubular Joint

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Experimental study of the static behavior of tubular N-joints

Experimental study on the steel tube moment connections with modified cover-plated reinforcement

Rotational performance of semi-rigid plate-type joints for reticulated shell structures composed of plate members

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Experimental and Numerical Study on the Performance of New Prefabricated Connections for Free-Form Grid Structures

Experimental research and finite element analysis on tubular joints of Hangzhou East Railway Station

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Study on Synergistic Mechanism of Tube–gusset Plate Connections with Multi-Stiffened Plates

02.05: Design of concrete-filled steel tubular longitudinal gusset plate connections

Experimental and Numerical Study on Ultimate Behaviour of High-Strength Steel Tubular K-joints with External Annular Steel Plates on Chord Circumference

Study on In-Plane Behavior of Thin-walled Concrete-filled Steel Tubular Gusset Plate T-joints

Experimental Study on the Axial Compressive Strength of Vertical Inner Plate Reinforced Square Hollow Section T-joints

Behavior of the Welded Tubular Joint in Spatial Lattice Shell Structures

Experimental study and FEM analysis on mechanical behavior of a steel tubular joint with bolted connection subject to biaxial compression

Nonlinear Analysis for the Bearing Properties of Multiplanar Tubular Joints with Square and Circular Hollow Sections

Nonlinear Analysis on Ultimate Flexural Bearing Capacity of the N-Shaped Steel Tubular Joints

Numerical Simulation and Experimental Analysis on Steel Semi-Rigid Joints

Experimental and numerical research on mechanical behavior of prestressed high-strength bolt joint

Experimental and numerical studies of a new prefabricated steel frame joint without field-welding: Design and static performance