Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Research on Key Joints Design of Mega Frame of the Shanghai Tower

JOINTS OF MULTI-STORY SPANNED DIAGONAL BRACING SYSTEM IN TALL STEEL BUILDINGS: ANALYSIS AND DESIGN METHOD

Experimental Study on Construction Tension and Local Component Failure of Double Inner and Outer Latticed Shell String Structure

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Study on design of binate diagonal mega-bracing system for a high-rise steel building

Experimental research and finite element analysis on tubular joints of Hangzhou East Railway Station

Design and Research of the Long-Span Truss String Structure for the Platform Canopy of Beijing North Station

Tensile Behavior of Novel Column-to-column Connection for Modular Steel Construction Using High-Strength Bolts

Experimental and numerical studies of a new prefabricated steel frame joint without field-welding: Design and static performance

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Experimental Research and Finite Element Analysis on Joints of Sun Valley Steel Structure for the Expo Axis Project

Frame model for outrigger truss-core wall joint in super high-rise buildings

Numerical Simulation and Experimental Analysis on Steel Semi-Rigid Joints

Experimental study and theoretical analysis of ultimate strength of steel tubular K-joints of tall towers

Seismic Performance of Joints between Steel K-Style Outrigger Trusses and Concrete Cores in Tall Buildings

NUMERICAL AND THEORETICAL RESEARCH ON MECHANICAL PERFORMANCE OF OUTRIGGER TRUSS-WALL JOINT IN SUPER HIGH-RISE BUILDINGS

Fishbone-shaped Beam–column Model for Steel Outrigger Truss–concrete Wall Composite Joints

Experimental Study of Ultra-Large Capacity End-Plate Joints

Investigation of aluminium bolted joint (HBJ) system behavior

REINFORCEMENT DESIGN OF MULTISTORY STEEL FRAME BEAM-COLUMN JOINTS

Investigations and proposed design rules on bolted connections for high strength steel