Investigations and proposed design rules on bolted connections for high strength steel

SHI Yong-jiu,PAN Bin,WANG Yuan-qing

DOI: https://doi.org/10.3969/j.issn.1673－4602.2013.01.005

2013-01-01

Abstract:The use of high strength steel(above grade Q460) for high-rise and long-span structures has been increasing in recent years.But there aren't specific design bearing strength and detail requirements for high strength steel bolted connection,which should be explored through systemic experimental and theoretical analysis.The paper presents experimental research of 9 tension splices with bolts in double shear and steel grade Q460 was used.Due to various end distance e1,edge distance e2 and pitches p2,different failure modes are observed: end tear-out,bearing and net-section facture.Base on test data and non-linear material,a geometrical and contact analysis is carried out to predict the load-extension curves of typical bolted connection with high strength steel.The load-extension curves and ultimate resistances of test specimens are successfully predicted,as shows the accuracy of numerical simulations.Furthermore,a parametric study on bolted connections with different configurations is performed to provide bearing resistances for practical design,and the results of the finite element analysis are also compared with three codified design rules.It's found that the new design bearing resistance presented by Mo■e is the most accurate and truly reflects the effect of e1,e2;while European code is conservative and American code doesn't cover the influence of e2.Finally,the paper proposes the design bearing strength of Q460 steel grade bolted connection in Chinese code,based on existing experimental and parametric analysis results.