Abstract:In recent years, composite columns have gained much attention in offshore and marine engineering. This paper, with the motivation of a better design for circular straight double skin steel tubes confined concrete (DSSTCC) columns, theoretically explores the local buckling of the internally stiffened inner skin in this column. Firstly, the force analysis of a DSSTCC stub column was conducted, and its common failure modes were outlined. Based on the similar structural performance of the inner tube and the fixed circular arch, a concise buckling analysis model was built up. Then different buckling modes of clamped circular arches under the uniform radial load were presented. The ultimate load-carrying capacity of internally stiffened inner tubes under different buckling modes was also discussed, which shows relatively high dependence on the structural stability. Next, the calculation method of the expected ultimate hoop compressive stress was given, and the main computational procedure of the cross-sectional slenderness limit for internally stiffened inner skins was illustrated. In addition, a very simple prescriptive equation that considers the elastic modulus, the yield stress, and the formed arch's central angle value was fitted to estimate the cross-sectional slenderness limit for inner tubes with internal stiffeners, with which a slender cross-section can be delineated from an effective one. Meanwhile, the elastic buckling stress of the inner tube was also given. Finally, the applicability of the proposed methodology to materials with the bilinear model, the bilinear plus nonlinear hardening model, the idealized multilinear model, or the Ramberg-Osgood model was investigated, thereby demonstrating its good adaptability to these four common nonlinear constitutive models.

Theoretical and Experimental Study on Load-Carrying Capacity of Combined Members Consisted of Inner and Sleeved Tubes

Experimental study and capacity analysis of double-tapered rectangular steel tubes

Load-carrying capacity of welded hollow spherical joints subject to combined planar tri-directional axial force and bending moment

Experimental Investigation of Circular Steel Tubes with Tapered Ends Subjected to Bending,compression and Torsion

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Experimental and numerical study on the axial compression performance of the prestressed sleeved members

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

EXPERIMENT AND DESIGN OF DOUBLE SKINNED CONCRETE|FILLED STEEL TUBES

FLEXURAL BEHAVIOUR OF THIN-WALLED DODECAGONAL SECTION DOUBLE SKIN CONCRETE-FILLED STEEL TUBES

Bending Strength of Thin-Walled Centrifugal Concrete-Filled Steel Tubes

Behavior of Thin-Walled Dodecagonal Section Double Skin Concrete-Filled Steel Tubes under Bending

Design method and experimental investigation of compression members in a space structure strengthened by folded sleeves

Finite Element Analyses and Experiments on Welded Spherical Joints with Rectangular Tubes

STUDY ON AXIAL COMPRESSION BEARING CAPACITY OF REINFORCED CONCRETE FILLED STEEL TUBE MEMBERS

Theoretical and experimental research on flexural behavior of concrete-filled steel tubes with inner stiffening

Analytical and experimental investigation on axial compression capacity of carbon fiber-reinforced plastic-confined concrete-filled double-skin steel tube stub columns

Slenderness Limit for Inner Tubes with Internal Stiffeners in DSSTCC Columns

STUDY ON BEHAVIOR OF CONCRETE FILLED ELLIPTICAL STEEL TUBE MEMBERS PART II: UNDER BENDING AND ECCENTRIC COMPRESSION

Experimental Research on Concrete Filled Thin-Walled Steel Tube Long Columns

Behaviour of tapered concrete-filled double-skin steel tubular columns with large hollow ratio under combined compression-bending-torsion loads: Experiments

A Mechanical Model and Experimental Investigations for Axially Compressed Sleeved Column