Abstract:Tanks and silos are often designed as ring-stiffened cylindrical shells. Nowadays, the load-increasing effect of closely spaced ring stiffeners under axial compression has received limited attention in research and practice. Considering the structural safety, the ring-stiffened shell needs to be estimated on the conservative side in practice. This is not desirable in terms of modern lightweight steel structures. However, material efficiency is achieved by combining thin plates with ring-stiffeners. In this paper, small specimen experimental series are carried out to calibrate numerical models, which are subsequently used in parameter studies, because the large-scale experiments are cost-intensive and therefore difficult to carry out in the laboratory. The small cylindrical shells are manufactured by welding of two half-cylindrical shells and the ring stiffeners are spot-welded to the cylindrical shell. Geometric dimension of shell specimens is measured by 3D scanning technology. The measured geometric imperfection information is directly imported into the numerical model based on a mapping relationship and the buckling tests are recalculated by means of geometrically and materially nonlinear analysis with imperfection. The results indicate that the buckling resistance calculated by the Finite Element analysis is very close to that of the test results. The initial geometric imperfection is discussed with reference to the Eurocodes design standard. Furthermore, influence of the ring-stiffener parameter, including imperfection amplitude, radius over thickness ratio, geometry of ring stiffener etc., on the buckling load and knockdown factor is discussed based on a large number of parameter study.

Buckling Analysis of Ring-Stiffened Cylindrical Shells with Cutouts by Mixed Method of Finite Strip and Finite Element

Circumferential Folded Single-Layer Reticulated Spherical Shell and Simplified Calculation Method in Structure Static Analysis

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Buckling analysis of ring-stiffened cylindric shells under lateral pressure

Buckling and material failure analyses for ring-stiffened composite shells subjected to hydrostatic pressure

The Effect of the Ring on the Buckling of Stiffened Cylindrical Shells

Buckling of ring-stiffened cylindrical shell under axial compression: Experiment and numerical simulation

Buckling Analysis and Optimization of Stiffened Cylindrical Shells under Uniform Axial Compression

Buckling behavior of laminated composite stiffened cylindrical shell panels having cutout for different parametric variations

Finite Element Analysis of Tangential Rectangle Joint Pipe on the Shell of an Cyclone

A novel model for buckling of composite shell: Ring stiffened shell and stiffened shell with cutout under hydrostatic pressure

Analysis of the Influence of Stiffness Reduction on the Load Carrying Capacity of Ring-Stiffened Cylindrical Shell

Mechanical Buckling Analysis of Composite Panels With/without Cutouts

Buckling and Postbuckling of Stiffened Cylindrical Shells under Axial Compression

Axial Elastic-plastic Dynamic Buckling of Ring-Stiffened Cylindrical Shells

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Buckling Analysis of Cylindrical Shells Based on Mixed Variables Strip Transfer Function Method

An efficient compound strip method for buckling analysis of stiffened cylinders

INSTABILITY OF RING-STIFFENED CYLINDRICAL SHELL WITH SHEAR EFFECT

Postbuckling analysis of stiffened laminated cylindrical shells under combined external liquid pressure and axial compression

Buckling and Strength Failure for Unstiffened and Ring-Stiffened Composite Shells