Experimental study on the failure modes of circumferentially corrugated cylinders under external hydrostatic pressure

Wen-xian Tang,Shan Zhang,Jian Zhang,Zheng Tang

DOI: https://doi.org/10.1016/j.tws.2020.106988

2020-11-01

Abstract:<p>In this study, the linear and nonlinear buckling problems of circumferentially corrugated cylindrical shells under uniform external pressure were investigated, as was the effect of corrugation amplitude on buckling. Five sets of shells with different amplitudes were fabricated; each group had two identical cylindrical shells made of photosensitive resin, and their wall thickness and geometric appearance were measured and tested to collapse under hydrostatic pressure. A comparison between finite element results and experimental data was also made for an externally pressurised cylindrical shell. According to the experimental results, as the amplitude of the corrugation increased, the buckling capacity of the cylindrical shell first increased and then decreased, which may have been related to the performance of the material. The location of the model failure was basically the same as the location of maximum stress, and the experimental results agreed well with the numerical calculation.</p>

engineering, mechanical,mechanics, civil

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to study the buckling modes and buckling capacity of circumferentially corrugated cylindrical shells under external hydrostatic pressure. Specifically, the paper explores the influence of corrugation amplitude on the buckling behavior of cylindrical shells. Through experiments and numerical simulations, the author analyzes the linear and nonlinear buckling problems of cylindrical shells under uniform external pressure with different corrugation amplitudes, and evaluates the influence of corrugation amplitude on the buckling capacity.

The main research object of the paper is the circumferentially corrugated cylindrical shells under external hydrostatic pressure. These shells are made of photosensitive resin and manufactured by 3D printing technology. In the experiment, the author prepared five groups of cylindrical shells with different corrugation amplitudes. Each group contains two identical cylindrical shells. Their wall thicknesses and geometric shapes were measured, and failure tests under hydrostatic pressure were carried out. In addition, numerical simulations were also carried out by the finite element method to verify the experimental results.

The research shows that as the corrugation amplitude increases, the buckling capacity of the cylindrical shell first increases and then decreases, which may be related to the material properties. When the corrugation amplitude is 5 mm, the bearing capacity of the cylindrical shell is the highest; while when the corrugation amplitude is 10 mm and 15 mm, the cylindrical shell may experience strength failure. The experimental results are in good agreement with the numerical simulation results, which verifies the effectiveness of the corrugated structure in improving the buckling capacity of the cylindrical shell.