Abstract:The main load-bearing structure of submarines is the pressure shell. Shell failures are usually caused by high hydrostatic pressure and its own potential geometric imperfections. This paper proposes a cylindrical shell with a strong corrugated stiffening structure. Two theoretically geometrically identical shells are fabricated using CNC machining to ensure the reproducibility and reasonableness of the results. Firstly, the point cloud data of all the geometric parameters of the corrugated pressure cylindrical shells were obtained using a 3D scanner. Geomagic Control X 3D inspection software was used to determine the geometric deviations of the shells. Geometric reconstruction was performed using Geomagic Design X reverse modeling software to capture potential imperfections of the shells. The aluminum shells were then welded and placed in the pressure chamber. Failure loads were obtained for all shells by constant water injection and pressurization. Considering the confined nature of the pressure chamber, a nonlinear finite element analysis of the corrugated pressure cylindrical shell was carried out using Abaqus/Riks, taking into account actual fabrication imperfections. Finally, the failure behavior of the shells under uniform external pressure was determined. The results show that both corrugated pressure cylindrical shells have high machining accuracy. The numerical simulation results of the critical buckling load of the corrugated pressure cylindrical shells were in good agreement with the test results. The corrugated structure has additional advantages in retarding the generation and expansion of shell surface defects. The equilibrium path of the corrugated pressure cylindrical shell can be maintained in a smooth and continuous state, showing stable buckling behavior. This study will provide new inspiration for the structural design and failure prediction of the submarine pressure shell.

The mechanical behavior of cylindrical shell with composite corrugations under uniform and concentrated pressure

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Failure Behavior of Corrugated Pressure Cylindrical Shells with Variable Wall Thickness under Uniform External Pressure

Stress distributions and stiffness anisotropy of circumferentially corrugated shells under uniform external pressure

Buckling performance of inner corrugated pressure shells under external hydrostatic pressure

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Buckling Test of Metallic Thin-Walled Cylindrical Shells under Non-Uniform Axial Compression Loads

Experimental study on buckling behavior of composite cylindrical shells with and without circular holes under hydrostatic pressure

Experimental study on the failure modes of circumferentially corrugated cylinders under external hydrostatic pressure

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Buckling and Post-Buckling Behavior of Perfect/Perforated Composite Cylindrical Shells under Hydrostatic Pressure

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Collapse behavior of corrugated stiffened pressure shells under external hydrostatic pressure considering actual fabrication imperfections: A reverse modeling technique

Study on the Axial Compression Buckling Behaviors of Concentric Multi-Walled Cylindrical Shells Filled with Soft Materials

Research progress of composite cylindrical shells

Buckling performance of stiffened polymer composite cylindrical shell

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Experimental and numerical buckling analysis of carbon fiber composite cylindrical shells under external pressure

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Buckling of Cylindrical Shells with Measured Settlement under Axial Compression