Abstract:We studied the mechanical response and failure of composite cylindrical shell with pyramidal truss cores under axial compression. We developed interlocking method and a hot press method to manufacture lightweight carbon fiber composite cylindrical shell with pyramidal truss constructions. For interlocking method, Firstly, longitudinal and transverse ribs will be mass produced by 7075 aluminum using wire cutting method. Both Longitudinal and transverse ribs will be assembled together to form core materials using interlocking method. Carbon fiber composite curved face sheets (170) for both outer and inner skins of cylindrical shells will be made by hot press method in the curved steel mould. The outer skin of cylindrical shell will be assembled with curved aluminium pyramidal truss cores using J 242-A adhesive bonding, and then, the inner skin of shell will be built from two parts. For hot press method, Single walled cylindrical shells with pyramidal truss cores were made by hot press method firstly and then sandwich-walled cylindrical shells were fabricated by attaching inner carbon fiber-reinforced composite facesheets. In the analytical part of the study, The possible failure modes in axial compression of a composite cylindrical shell with pyramidal truss cores are illustrated in the following: (i) Euler buckling (EB), (ii) Overall buckling (OB), (iii) Local buckling between reinforcements (CB) and (iv) face crushing (CC). The collapse of the cylindrical shell is generally dictated by one of the competing mechanisms that depend on the geometry of the shell and the mechanical properties of the face and core materials. Four different failure modes were considered and theoretical models were presented to estimate the collapse strength associated with each failure mode. In the experimental part of the work, we used the analytical estimates to fabricate sandwich cylindrical shell that would allow probing the several different failure regimes. The measured collapse loads were in reasonable agreement with the analytical predictions.

Research progress of composite cylindrical shells

Simplified analysis method and research on mechanical properties of multi-wave and multi-span cylindrical lattice shells

The mechanical behavior of cylindrical shell with composite corrugations under uniform and concentrated pressure

Buckling Test of Metallic Thin-Walled Cylindrical Shells under Non-Uniform Axial Compression Loads

Recent Progresses in Lightweight Carbon Fibre Reinforced Lattice Cylindrical Shells

Study on the Axial Compression Buckling Behaviors of Concentric Multi-Walled Cylindrical Shells Filled with Soft Materials

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Design and Mechanical Characterization of Lattice Sandwich Cylindrical Shells

Fabrication And Axial Compressive Behavior Of Composite Sandwich Cylindrical Shells With Pyramidal Lattice Truss

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Buckling analyses of thin-walled cylindrical shells subjected to multi-region localized axial compression: Experimental and numerical study

STABILITY DESIGN OF AXIALLY COMPRESSED THIN STEEL CYLINDRICAL SHELLS

Buckling performance of stiffened polymer composite cylindrical shell

Fabrication and Mechanical Behavior of Carbon Fiber Composite Sandwich Cylindrical Shells with Corrugated Cores

Recent research advances on the dynamic analysis of composite shells: 2000–2009

Experimental study on buckling behavior of composite cylindrical shells with and without circular holes under hydrostatic pressure

Buckling behaviors of thin-walled cylindrical shells under localized axial compression loads, Part 1: Experimental study

Cylinder type pyramid lattice sandwich composite structure analysis of the axial compression performance

Axial Compressive Collapse of Ultralight Corrugated Sandwich Cylindrical Shells

Strain Response and Buckling Behavior of Composite Cylindrical Shells Subjected to External Pressure with One End Fixed and the Other under Free Boundary Conditions