Abstract:With the development of analytical instrumentation to minimization,integration and automation,the microfluidic chips,which are more integrated,complex and diversified,have been applied widely on the manufacturing of analytical instrumentation.However,the present photolithography-based microfabrication technology,which is only able to pattern microchannels with simple inside structures,can not follow the rapid development of requirements.For solving the problem,a fabrication method based on the restricting effect of laminar flow is proposed for the micro etching on isotropic substrates.Experiments were conducted inside glass-based microchannels,in which certain etchant was used to form complicated microstructures.The flow parameters’ effects on the aspect ratio,side wall profile and etching rate were revealed by the experiments.The experimental results reveal that the topography of micro structures patterned with the restricted flow etching method is mainly determined by the flowrates of separator and etchant.The computational fluid dynamics（CFD） model on the interface between multiple streams was established for the etching process,and analysis on the causes of various micro topographies was conducted based on the CFD simulation results.The experimental data consisted with the simulation results very well.The investigation depicted in this paper indicate that the flow restricted etching method provides sufficient references for the research and understanding on the mass transport at the liquid-liquid surface in the microchannel and can be used to pattern complex micro structures with high aspect ratios,meantime,it greatly enriches the microfabrication technology for microfluidic chips.

Realization of the Microchannel with Microisland Arrays by One-Step Silicon Wet Etching Process

Wafer-Scale Fabrication of V-Shaped Silicon Nano-Slit Arrays

Massive Fabrication of Silicon Nanopore Arrays with Tunable Shapes

Fabrication of Silicon Nanopore Arrays with Three-Step Wet Etching

Fabrication of Nanopore and Nanopore Arrays in Si Substrate by Wet Etching Method at Wafer Scale

Fabrication of Silicon Nanopore Arrays Using A Combination of Dry and Wet Etching

Micro Etching Method Inside Microchannels

A Novel Anisotropic Wet Etching Process of (100)-Silicon with Areaefficiency on Convex Corner Compensation Patterns

Fabrication of Optofluidic Systems Using Isotropic Wet Etched Masters in < 111 > Silicon Wafer

Wafer-scale Fabrication of High-Aspect Ratio Nanochannels Based on Edge-Lithography Technique.

Photo-electrochemical Etching of Macroporous Silicon Arrays Used in Silicon Microchannel Plates

Laser Lithography of Monolithically‐Integrated Multi‐Level Microchannels in Silicon

Flow-restricted Etching Method on Isotropic Substrates and Its Mechanism

Patterned Microstructure Array Fabrication By Using A Novel Standing Surface Acoustic Wave Device

Electrochemically Etched Pore Array in Silicon with Large Spacing and High-Aspect-ratio

Fabrication of 2D silicon nano-mold by side etch lift-off method

Novel polydimethylsiloxane (PDMS) based microchannel fabrication method for lab-on-a-chip application

Micorfabrication of Miniature Electrode Array along Micro Channels

A New Silicon Mold Process for Polydimethylsiloxane Microchannels

Fabrication Of Inverted-Pyramid Silicon Nanopore Arrays With Three-Step Wet Etching

High aspect ratio arrays of Si nano-pillars using displacement Talbot lithography and gas-MacEtch