Abstract:Wet anisotropic etching based silicon micromachining is an important technique to fabricate freestanding (e.g. cantilever) and fixed (e.g. cavity) structures on different orientation silicon wafers for various applications in microelectromechanical systems (MEMS). {111} planes are the slowest etch rate plane in all kinds of anisotropic etchants and therefore, a prolonged etching always leads to the appearance of {111} facets at the sidewalls of the fabricated structures. In wet anisotropic etching, undercutting occurs at the extruded corners and the curved edges of the mask patterns on the wafer surface. The rate of undercutting depends upon the type of etchant and the shape of mask edges and corners. Furthermore, the undercutting takes place at the straight edges if they do not contain {111} planes. {100} and {110} silicon wafers are most widely used in MEMS as well as microelectronics fabrication.This paper reviews the fabrication techniques of convex corner on {100} and {110} silicon wafers using anisotropic wet chemical etching. Fabrication methods are classified mainly into two major categories: corner compensation method and two-steps etching technique. In corner compensation method, extra mask pattern is added at the corner. Due to extra geometry, etching is delayed at the convex corner and hence the technique relies on time delayed etching. The shape and size of the compensating design strongly depends on the type of etchant, etching depth and the orientation of wafer surface. In this paper, various kinds of compensating designs published so far are discussed. Two-step etching method is employed for the fabrication of perfect convex corners. Since the perfectly sharp convex corner is formed by the intersection of {111} planes, each step of etching defines one of the facets of convex corners. In this method, two different ways are employed to perform the etching process and therefore can be subdivided into two parts. In one case, lithography step is performed after the first step of etching, while in the second case, all lithography steps are carried out before the etching process, but local oxidation of silicon (LOCOS) process is done after the first step of etching. The pros and cons of all techniques are discussed.

A Novel Anisotropic Wet Etching Process of (100)-Silicon with Areaefficiency on Convex Corner Compensation Patterns

A novel convex corner compensation for wet anisotropic etching on (100) silicon wafer

A New Approach To Convex Corner Compensation For Anisotropic Etching Of (100)Si In Koh

Recent Frontiers in Anisotropic Wet Chemical Etching Techniques for Precision Surface Modification of Industrial-Grade Bulk Crystalline Silicon Wafers: Enhancing Performance in Photovoltaics and MEMS Devices

A comprehensive review on convex and concave corners in silicon bulk micromachining based on anisotropic wet chemical etching

An Etchant for Delineation of Flow Pattern Defects in Heavily Doped N-Type Silicon Wafers

Silicon (100) undercutting modelling and corner compensation structures design in wet anisotropic etching process

Maskless Etching Of Three-Dimensional Silicon Structures In Koh

A Metal-Free Additive Texturization Method Used for Diamond-Wire-sawn Multi-Crystalline Silicon Wafers

Anisotropic Charge Transport Enabling High‐Throughput and High‐Aspect‐Ratio Wet Etching of Silicon Carbide (Small Methods 8/2022)

Modeling and Simulation of Silicon Dry Etching

Realization of the Microchannel with Microisland Arrays by One-Step Silicon Wet Etching Process

Optimization of Etching Processes for the Fabrication of Smooth Silicon Carbide Membranes for Applications in Quantum Technology

Simulation of three-dimensional etch profile of silicon during orientation dependent anisotropic etching

Study on compensation method for vertical trench using anisotropic wet etching

Toward Controllable Wet Etching of Monocrystalline Silicon: Roles of Mechanically Driven Defects

Wafer-Scale Fabrication of Ultra-High Aspect Ratio, Microscale Silicon Structures with Smooth Sidewalls Using Metal Assisted Chemical Etching

Formation Mechanism of Multi-Functional Black Silicon Based on Optimized Deep Reactive Ion Etching Technique with SF 6 /C 4 F 8

Wafer level microarcing model in 90nm chemical-vapor deposition low-k via etch on 300mm silicon-on-insulator substrate

Electrochemical etching strategy for shaping monolithic 3D structures from 4H-SiC wafers

Anisotropic Etching of Three-Dimensional Shapes in Silicon - the Important Role of Galvanic Interaction