Abstract:Abstract Wet anisotropic etching is extensively employed in silicon bulk micromachining to fabricate microstructures for various applications in the field of microelectromechanical systems (MEMS). In addition, it is most widely used for surface texturing to minimize the reflectance of light to improve the efficiency of crystalline silicon solar cells. In wet bulk micromachining, the etch rate is a major factor that affects the throughput. Slower etch rate increases the fabrication time and therefore is of great concern in MEMS industry where wet anisotropic etching is employed to perform the silicon bulk micromachining, especially to fabricate deep cavities and freestanding microstructures by removal of underneath material through undercutting process. Several methods have been proposed to increase the etch rate of silicon in wet anisotropic etchants either by physical means (e.g. agitation, microwave irradiation) or chemically by incorporation of additives. The ultrasonic agitation during etching and microwave irradiation on the etchants increase the etch rate. However, ultrasonic method may rupture the fragile structures and microwave irradiation causes irradiation damage to the structures. Another method is to increase the etching temperature towards the boiling point of the etchant. The etching characteristics of pure potassium hydroxide solution (KOH) is studied near the boiling point of KOH, while surfactant added tetramethylammonium hydroxide (TMAH) is investigated at higher temperature to increase the etch rate. Both these studies have shown a potential way of increasing the etch rate by elevating the temperature of the etchants to its boiling point, which is a function of concentration of etch solution. The effect of various kinds of additives on the etch rate of silicon is investigated in TMAH and KOH. In this paper, the additives which improve the etch rate have been discussed. Recently the effect of hydroxylamine (NH 2 OH) on the etching characteristics of TMAH and KOH is investigated in detail. The concentration of NH 2 OH in TMAH/KOH is varied to optimize the etchant composition to obtain improved etching characteristics especially the etch rate and undercutting which are important parameters for increasing throughput. In this article, different methods explored to improve the etch rate of silicon have been discussed so that the researchers/scientists/engineers can get the details of these methods in a single reference.

Recent Frontiers in Anisotropic Wet Chemical Etching Techniques for Precision Surface Modification of Industrial-Grade Bulk Crystalline Silicon Wafers: Enhancing Performance in Photovoltaics and MEMS Devices

Anisotropic Etching of Three-Dimensional Shapes in Silicon - the Important Role of Galvanic Interaction

Toward Controllable Wet Etching of Monocrystalline Silicon: Roles of Mechanically Driven Defects

Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing

High speed silicon wet anisotropic etching for applications in bulk micromachining: a review

Optimization of Etching Processes for the Fabrication of Smooth Silicon Carbide Membranes for Applications in Quantum Technology

A Metal-Free Additive Texturization Method Used for Diamond-Wire-sawn Multi-Crystalline Silicon Wafers

Surface Texturing of Silicon Wafers by Two-step Ag-assisted Etching Process with New NSR Solution

Anisotropic Wet Etching for Micro-Fabrication

Orientation-dependent surface morphology of crystalline silicon during anisotropic etching using a continuous cellular automaton

A new theory for the anisotropic etching of silicon and some underdeveloped chemical micromachining concepts

A Novel Anisotropic Wet Etching Process of (100)-Silicon with Areaefficiency on Convex Corner Compensation Patterns

Recent advances in plasma etching for micro and nano fabrication of silicon-based materials: a review

Research on Silicon Wafer Surface Phase under the Ultra-thin Slicing Process and Its Etching Hindrance Behavior during Metal-Assisted Chemical Etching

Recent Advances In Silicon Carbide Chemical Mechanical Polishing Technologies

Advanced textured monocrystalline silicon substrates with high optical scattering yields and low electrical recombination losses for supporting crack‐free nano‐ to poly‐crystalline film growth

Anisotropic etching behavior and topography formation mechanism of silicon solar cell surface textured by atmospheric plasma

High Aspect Ratio Si Etching Technique and Application

Study of Anisotropic Etching of (100) Si with Ultrasonic Agitation

Electrochemical etching strategy for shaping monolithic 3D structures from 4H-SiC wafers

Shaping the Future: Innovations in Silicon Wafer Production and Finishing