Abstract:Abstract Silicon bulk micromachining is extensively employed method in microelectromechanical systems (MEMS) for the formation of freestanding (e.g., cantilevers) and fixed (e.g., cavities) microstructures. Wet anisotropic etching is a popular technique to perform silicon micromachining as it is low-cost, scalable, and suitable for large scale batch processing, which are the major factors considered in the industry to reduce the cost of the product. In this work, we report the wet anisotropic etching characteristics of Si{111} in sodium hydroxide (NaOH) without and with addition of hydroxylamine (NH 2 OH). 10M NaOH and 12% NH 2 OH are used for this study. The effect of NH 2 OH is investigated on the etch rate, etched surface roughness and morphology, and the undercutting at mask edges aligned along direction. These are the major etching characteristics, which should be studied in a wet anisotropic etchant. A 3D laser scanning microscope is utilized to measure the surface roughness, etch depth, and undercutting length, while the etched surface morphology is examined using a scanning electron microscope (SEM). The incorporation of NH 2 OH in NaOH significantly enhances the etch rate and the undercutting at the mask edges that do not consist of {111} planes. To fabricate freestanding structure (e.g., microcantilever) on Si{111} wafer, high undercutting at mask edges is desirable to reduce the release time. Moreover, the effect of etchant age on the abovementioned etching characteristics are investigated. The etch rate and undercutting reduce significantly with the age of the modified NaOH. The present paper reports very interesting results for the applications in wet bulk micromachining of Si{111}.

Anisotropic Wet Etching for Micro-Fabrication

Recent Frontiers in Anisotropic Wet Chemical Etching Techniques for Precision Surface Modification of Industrial-Grade Bulk Crystalline Silicon Wafers: Enhancing Performance in Photovoltaics and MEMS Devices

A new theory for the anisotropic etching of silicon and some underdeveloped chemical micromachining concepts

Bulk Micromachining Fabrication Platform Using the Integration of DRIE and Wet Anisotropic Etching

Fabrication of Vertical Sidewalls by Anisotropic Etching of Silicon (100) Wafers

Micro Etching Method Inside Microchannels

Anisotropic etching of Si

Fabrication of Diamond Microstructures by Using Dry and Wet Etching Methods

Wet anisotropic etching characteristics of Si{111} in NaOH-based solution for silicon bulk micromachining

Fabrication of Optofluidic Systems Using Isotropic Wet Etched Masters in < 111 > Silicon Wafer

Study of Anisotropic Etching of (100) Si with Ultrasonic Agitation

Anisotropic Etching of Three-Dimensional Shapes in Silicon - the Important Role of Galvanic Interaction

Experimental Study on Roughness and Flatness of Micromirror Fabricated by Different Anisotropic Silicon Etching Processes

Facile fabrication of asymmetric surfaces via mechanochemistry

High Aspect Ratio Si Etching Technique and Application

Fabrication Of Inverted-Pyramid Silicon Nanopore Arrays With Three-Step Wet Etching

Fabrication of High Aspect Ratio Muti-Steps on Si by Dry Etching

Optimization of Etching Processes for the Fabrication of Smooth Silicon Carbide Membranes for Applications in Quantum Technology

Simulation of three-dimensional etch profile of silicon during orientation dependent anisotropic etching

Anisotropic Etching of SiC Whiskers

Electrochemical etching strategy for shaping monolithic 3D structures from 4H-SiC wafers