Abstract:This paper reports a novel bi-stable structure for a radio frequency micro-electro-mechanical system (RF MEMS) switch. The structure is activated by an in-plane electrostatic actuator and adopts the Inertial Generated Timing Sequence (IGTS) method to latch, allowing the switch to turn on and off with a simple pulse signal. This design eliminates the need for a complex external control circuit and enables the switch to maintain the ON state at zero power consumption. Furthermore, the electrode shape is designed to reduce the driving voltage, thereby lowering the power consumption of the boost circuit. To test and verify the functionality of the bi-stable mechanism, a coplanar waveguide (CPW), which is separated from the actuation structure to reduce interference between the DC drive signal and the RF transmitted signal, is employed. Fabricated using a silicon-on-glass process with two lithographic masks, the RF MEMS switch achieves bi-stability with a single pulse signal of 18V for latching and 14V for unlatching. The measured insertion loss and isolation at 6 GHz are $-$ 0.28 dB and $-$ 36.68 dB, respectively. This switch exhibits low pull-in voltage, low power consumption, and simple control, holding potential for future RF systems tailored to wireless applications with an emphasis on low power consumption and system simplicity. 2024-0008

A Low Power Pulse Signal Acquisition ASIC for MEMS Switch

An ASIC Solution for Intelligent Electrodes and Active-Cable Used in a Wearable ECG Monitoring System.

A 1.0 V 78 μw Reconfigurable ASIC Embedded in an Intelligent Electrode for Continuous Remote ECG Applications

Optimal Design of a Low-Power, Phase-Switching Modulator for Implantable Medical Applications.

An Approach to Near Zero Power Bi-Stable Driving With a Simple Pulse Signal for RF MEMS Switch

A Zero Static Power Consumption Bi-Stable RF MEMS Switch Based on Inertial Generated Timing Sequence Method

A Low Energy ASIC for Triple-Chamber Cardiac Pacemakers with Contact Resistance Measurement.

A Low-Noise HV Interface Circuit for MEMS Vibratory Gyroscope

A Miniature On-Chip Multi-Functional ECG Signal Processor with 30 &#x00b5;w Ultra-Low Power Consumption

A Passive RF Receiving and Power Switch ASIC for Remote Power Control with Zero Stand-by Power

A 2.2μw PWM-Based Time-Domain Sensor Interface with 540mvpp Input Signal Range, 81.6db SNDR and 80MΩ Input Impedance

Design and Implementation of an On-Chip Low-Power and High-Flexibility System for Data Acquisition and Processing of an Inertial Measurement Unit.

A Self-Powered MEMS Inertial Switch for Potential Zero Power-Consumption Wake-Up Application

A Low-noise High-voltage Interface Circuit for Capacitive MEMS Gyroscope.

A Low-Voltage Lateral MEMS Switch with High RF Performance

Low Voltage Low Power SAR ADC for Implantable Medical Chips

A 0.2 V Micro-Electromechanical Switch Enabled by a Phase Transition

Design And Fabrication Of A Latching Silicon-Based Mems Switch

A Low Power Signal Acquisition Channel with a Novel Systematic Power Minimization Scheme

An Energy-Efficient ASIC for Wireless Body Sensor Networks in Medical Applications

A low power MEMS-ASIC silicon resonant accelerometor with sub-µg bias instability and ±30g full-scale