Abstract:Pulsed power systems can deliver high peak power in a micro/nano-second timescale to various loads in scientific and industrial applications, whose performances are significantly influenced by the pulsed discharge switch. This article presents the development and comprehensive tests of a miniaturized sealed-off pseudospark switch. The structure of double-gap and multi-channel is adopted to achieve the high hold-off voltage and high current capacity. In single pulse tests, the influence of pressure in the switch is analyzed. As the pressure increases, values of multiple parameters decrease, like self-breakdown voltage, trigger delay, and voltage dropping time. In a wide pressure range, trigger jitter is below 3 ns, and the minimum is <1 ns. At low pressure, the transient voltage across two gaps becomes inconsistent, and two types of current quenching are observed, which are related to processes occurring on cathode surface. In repetitive pulse tests, the direct repetitive operation is up to 3.5 kHz while higher repetition rate is limited by the trigger system. In double-pulse tests, the maximum repetition rate can be higher than 8 kHz for 40 kV pulsed voltage. Meanwhile, the insulation recovery speed is higher at lower pressure, and as the time delay between two pulses increases, the second pulse breakdown voltage increases nonlinearly. In high current tests, the switch is also used in metal wire explosion experiments and operates at the condition of 30 kV/40 kA for more than 104 shots without performance degradation. Further lifetime tests point out that the switch can work for >106 shots stably at moderate current. Experiments prove that the designed switch has superior performances including high hold-off voltage (>50 kV), low jitter (<1 ns), high repetition rate (>3.5 kHz), high peak current (>40 kA), long lifetime (>106 shots) and miniaturized size.

Development of P-C Switch with Adjustable Gap

Long Lifetime, Triggered, Spark-Gap Switch For Repetitive Pulsed Power Applications

Multiple-Gap Spark Gap Switch

Design and Performance Analysis of Multi-gap Multi-channel Spark Switch with LCR Triggered Method

A Repetitive Pulser with Four Spark Gap Switches

A Triggered Spark-Gap Switch for High-Repetition Rate High-Voltage Pulse Generation

An Efficient, Repetitive Nanosecond Pulsed Power Generator with Ten Synchronized Spark Gap Switches

Development of a Heavy Duty Pulsed Power Generator with Ten Spark Gap Switches

Investigation on a Novel Multiple-Switch Pulsed Power Technology

A Miniaturized Sealed-Off Double-Gap Pseudospark Switch for High Power and High Repetition Rate Pulsed Discharge Applications

Characteristics of Sf6 Switch with A Small Gap under High Pressure and Nanosecond Pulse

Design, Simulation, and Characterization of a Low-Cost In-Plane Spark Gap Microswitch with Dual-Trigger Electrode for Pulsed Power Applications.

High-repetition-rate Nanosecond Spark Gap Switch

The Development of Solid-state Pulse Generator Based on Marx Circuit with Chopping Switch

A 7.8 kV nanosecond pulse generator with a 500 Hz repetition rate

Experimental study of vacuum switch applied in pulse source system

Design and investigation of a capacitance-coupling pre-ionized sharpening switch

Development of a High-Voltage Fast Pulsed Source for Two-Stage Cascaded Electro-Optic Switch

Development of a laser-triggered film switch for nanosecond rectangular pulse generator

Research of an Electromagnetically Actuated Spark Gap Switch.

Development of Automatic Nanosecond Risetime High-voltage Recatangular Pulse Generator Based on Dielectric Foil Switch