Abstract:Summary form only given. Because of higher hold-off voltage and higher current than power semiconductor such as GTO, MOSFET, PCSS, SOS etc., spark gap switches are generally used in the last output stage of high power modulator. But its recovery time is millisecond level, so it is prevented on the high rep-rate conditions. The gaseous recovery in a spark gap was investigated by using Two-pulses method with which the tested spark gap was broken down twice by two identical voltage pulses with a preset time interval in between. While the first breakdown is overvolted breakdown, the second breakdown happens usually at a voltage much lower than the first one. By comparing the two breakdown voltages the gaseous recovery as a function of the time interval between the two voltage pulses was obtained. There are two plateaus on the curve of the breakdown voltage recovery. The first plateau appears at the voltage of about the DC static breakdown and the second one appears when the gas is almost fully recovered. It was found that the shorter gaps at all nitrogen pressure tend to recover faster and the gaps with higher pressure also tend to recover faster. If more energy is deposited in the spark channel produced by the first breakdown, the gas insulation recovers slower. Both the first breakdown voltage and the second one obey Gaussian distribution. If the second breakdown happens at the point before the end of the first plateau on the curve of the breakdown voltage recovery, its mean square deviation of the breakdown voltage distribution will be smaller than that of the first breakdown. By taking photographs of the discharge in the spark gap, it was important to find that the spark channel produced by the second breakdown usually does not follow that by the first breakdown. The second spark channel is located with a distance of 0~3 mm from the first one. The longer is the time interval between the two voltage pulses, the larger is the distance.

Investigation on Breakdown Characteristics of a Pulsed Gas Switch and Influence of Pre-Ionization

Optical Diagnosis of Preionization Mechanisms and Breakdown Characteristics in a Nanosecond Switch

A Calculation Model For Breakdown Time Delay And Jitter Of Gas Switches Under Hundred-Nanosecond Pulses And Its Application In A Self-Triggered Pre-Ionized Switch

Long Lifetime, Triggered, Spark-Gap Switch For Repetitive Pulsed Power Applications

Experimental investigation and theoretical analysis of the breakdown time delay and jitter of multi-gap gas switch gaps

Investigation of insulating characteristics of pressurized gas spark gap switch

The Effect of Initial Electrons Generation Approaches on Nanosecond Pulsed Breakdown Characteristics.

Breakdown Processes and Mechanisms of Preionized Nitrogen Spark Gaps Under Sub-Microsecond Pulses

Time Delay Statistics Modeling of Megavolt Self-Triggered Pre-Ionized Switch under Nanosecond Pulses

Breakdown characteristics of gas switch under nanosecond pulse voltage

Preliminary Research on Breakdown Mechanism of Gas Switch

Comparative Study on Breakdown Characteristics of Trigger Gap and Overvoltage Gap in a Gas Pressurized Closing Switch

A Low-Jitter Self-Triggered Spark-Discharge Pre-Ionization Switch: Primary Research on Its Breakdown Characteristics and Working Mechanisms

Study on Breakdown Stability of Gas Spark Switches

Optimization of a Nanosecond Pre-Ionization Switch’s Breakdown Jitter Characteristic Based on a Probability Distribution Model of Electron Avalanche’s Initiation

Using Self-Triggered Sustaining Pre-Ionization to Obtain Nanosecond Jitter in a MV Pulsed Gas Switch

Overvolted breakdown and recovery characteristic of spark gap switch

Comparative Study of Pulsed Breakdown Processes and Mechanisms in Self-Triggered Four-Electrode Pre-Ionized Switches

Research of an Electromagnetically Actuated Spark Gap Switch.

Influence factors and improvement scheme on the breakdown behavior of pseudospark switch

Effects of Optical Pulse Parameters on a Pulsed UV-Illuminated Switch and Their Adjusting Methods