Abstract:The sharpening switch is one of the most important elements in the trigger generator, which is used to sharpen the front of the trigger pulse. The breakdown performance of the sharpening switch has an important influence on the output and stability of the trigger generator. In this paper, a novel 200 kV capacitance-coupling pre-ionized sharpening switch, which can realize pre-ionization by dividing voltage through its own structural capacitances, is proposed and investigated. In order to obtain the optimal parameters of the pre-ionized sharpening switch, the influences of the electrode structure, electrode material, main gap distance, and pre-ionized gap distance on the breakdown performance are studied experimentally. The experimental results show that the electrode structure with a circular knife-edged cathode and a plate-shaped anode has the smallest breakdown jitter, followed by the needle-plate structure and the tapered ball-head structure. The stainless steel electrode has the smallest jitter, followed by graphite, aluminum, and brass electrodes. When the gap distances of the main gap and the pre-ionized gap are 13 and 1.5 mm, respectively, the breakdown stability of the pre-ionized sharpening switch is the best. Under an input voltage pulse with a rise time of about one microsecond, the jitter of the capacitance-coupling pre-ionized sharpening switch with the optimal parameters is 6.08 ns, which is about 0.6% of the rise time of the input pulse. The jitter decreases by 44.5% compared to the switch without pre-ionization. The rise time of the output pulse is sharpened to 17 ns, corresponding to a voltage rise rate of more than 11 kV/ns.

Using Self-Triggered Sustaining Pre-Ionization to Obtain Nanosecond Jitter in a MV Pulsed Gas Switch

A Low-Jitter Self-Triggered Spark-Discharge Pre-Ionization Switch: Primary Research on Its Breakdown Characteristics and Working Mechanisms

Long Lifetime, Triggered, Spark-Gap Switch For Repetitive Pulsed Power Applications

Optical Diagnosis of Preionization Mechanisms and Breakdown Characteristics in a Nanosecond Switch

A Triggered Spark-Gap Switch for High-Repetition Rate High-Voltage Pulse Generation

A Calculation Model For Breakdown Time Delay And Jitter Of Gas Switches Under Hundred-Nanosecond Pulses And Its Application In A Self-Triggered Pre-Ionized Switch

Time Delay Statistics Modeling of Megavolt Self-Triggered Pre-Ionized Switch under Nanosecond Pulses

Design and Performance Analysis of Multi-gap Multi-channel Spark Switch with LCR Triggered Method

Optimization of a Nanosecond Pre-Ionization Switch’s Breakdown Jitter Characteristic Based on a Probability Distribution Model of Electron Avalanche’s Initiation

Multiple-Gap Spark Gap Switch

Investigation on Breakdown Characteristics of a Pulsed Gas Switch and Influence of Pre-Ionization

An Efficient, Repetitive Nanosecond Pulsed Power Generator with Ten Synchronized Spark Gap Switches

A novel low-jitter plasma-jet triggered gas switch operated at a low working coefficient

A Gas Switch Triggered by a Microhollow Cathode Discharge (MHCD) Array with Lower Trigger Energy

Breakdown Processes and Mechanisms of Preionized Nitrogen Spark Gaps Under Sub-Microsecond Pulses

A Three-Electrode Gas Switch Triggered by Microhollow Cathode Discharge with Low Trigger Voltage

Design and investigation of a capacitance-coupling pre-ionized sharpening switch

Investigation on a Novel Multiple-Switch Pulsed Power Technology

Study on discharge characteristics of six-gap gas switch with corona assisted triggering

Synchronization of Multiple Spark-Gap Switches by A Transmission Line Transformer

Pulsed Corona Generation Using a High-Power Semiconductor Diode Switch