Abstract:This paper proposes an architecture of the wireless monitoring system for the real-time monitoring of the orthopedic implants, which monitors the implant duty cycle, detects abnormal asymmetry, high amounts of force, and other conditions of the orthopedic implants. Data for diagnosis are communicated wirelessly by the radio-frequency (RF) signal between the embedded chip and the remote circuit. In different working modes, the system can be powered by the RF signal or stiff lead zirconate-titanate (PZT) ceramics which are able to convert mechanical energy inside the orthopedic implant into electrical energy. The power circuits with a variable ratio switched-capacitor (SC) dc-dc converter have been taped out with 0.35-mum complementary metal-oxide semiconductor (CMOS) technology. The test results show that the SC converter can transfer the input voltage that ranges from 5 V to 14 V from the PZT ceramics into the voltage ranging from 2 V to 2.5 V which will be dealt with by a low drop-out circuit in the future work. The total efficiency of the SC converter is from 28% to 42% at full-time working mode. The analog-to-digital converter (ADC) circuits have been fabricated in a 0.18-mum 1P6M CMOS process. The test results show that the ADC chip consumes only 12.5 muW in working mode and 150 nW in the sleep mode. The circuits, including RF circuits, ADC, and the microcontrol unit, have been implemented in a 0.18-mu m CMOS process. Future work includes some clinical experiments test in the application where PZT elements are used for power generation in total knee-replacement implants.

Optimal Design of a Low-Power, Phase-Switching Modulator for Implantable Medical Applications.

Low Power High-Speed CMOS Dual-Modulus Prescaler Design with Imbalanced Phase-Switching Technique

An Ultra Broadband Passive Vector Modulator Phase Shifter

A 0.65V 1.2mw 2.4ghz/400mhz Dual-Mode Phase Modulator for Mobile Healthcare Applications

A Current-Switching Communication Technique for Miniaturized Medical Implants

An Ultra-Low Power 400mhz OOK Transceiver for Medical Implanted Applications.

A High-Efficiency, Low-Power Wireless Power and Data Frontend for Implantable Applications

Power Optimization of High Performance

Ultra low-FOM high-precision ΔΣ modulators with fully-clocked SO and zero static power quantizers

A Sub-100 $\mu$ W MICS/ISM Band Transmitter Based on Injection-Locking and Frequency Multiplication

A 6.78 MHz High-Efficiency Wireless Power Transfer Transmitter With Adaptive Dead-Time Control and Transistor-Width Switching for Implantable Medical Devices

Design of a Low-Power, High-Data-Rate, and Crystal-Less All-Digital IR-UWB Transmitter for High-Density Neural Implants

A 23.7‐uW 93.5‐dB SNDR delta‐sigma modulator for healthcare and medical diagnostics

Wireless energy and signal transmission system for micro implantable medical system

A 90µW MICS/ISM band transmitter with 22% global efficiency

Narrowband FSK Transceiver Circuit for Wireless Power and Data Transmission in Biomedical Implants

A Low Power Low Voltage 16 Bit Audio SigmaDelta Modulator.

A Wide-Input-Range Low-Power Ask Demodulator For Wireless Data Transmission In Retinal Prosthesis

Design of Low Power Consumption Controller Applied to Implantable Medical Device

High-Performance Wireless Power and Data Transmission System for Medical Implant Devices Using ASK Modulation

Low-power circuits for the bidirectional wireless monitoring system of the orthopedic implants