Abstract:This paper introduces a wirelessly powered multimodal animal physiological monitoring application-specific integrated circuit (ASIC). Fabricated in the 180 nm process, the ASIC can be integrated into an injectable device to monitor subcutaneous body temperature, electrocardiography (ECG), and photoplethysmography (PPG). To minimize the device size, the ASIC employs a miniature receiver (Rx) coil for wireless power receiving and data communication through a single inductive link operating at 13.56 MHz. We propose a folded L-shape Rx coil with improved coupling to the transmitter (Tx) coil, even in the presence of misalignment, and enhanced quality factor. The ASIC functions alternatively between recording and sleeping modes, consuming 2.55 μW on average. For PPG measurements, a reflection-type PPG sensor illuminates an LED with tunable current pulses. A current-input analog frontend (AFE) amplifies the current of a photodiode (PD) with 30.8 pARMS current input-referred noise (IRN). The ECG AFE captures ECG signals with a configurable gain of 45-80 dB. The temperature AFE achieves 0.02 ̊C inaccuracy within a sensing range between 27-47 ̊C. The AFE outputs are sequentially digitized by a 10-bit successive approximation register (SAR) analog-to-digital converter (ADC) with an effective number of bits (ENOB) of 8.79. To improve the reliability of data transmission, we propose a memory-assisted backscatter scheme that stores ADC data in an off-chip memory and transmits it when the coupling condition is stable. This scheme achieves a package loss rate (PLR) lower than 0.2% while allowing 24-hour data storage. The device's functionality has been evaluated by in vivo experiments.

An Energy-Efficient ASIC for Wireless Body Sensor Networks in Medical Applications

An Energy-Efficient ASIC with Real-Time Work-on-demand for Wireless Body Sensor Network

A Multi-Parameter Bio-Electric ASIC Sensor with Integrated 2-Wire Data Transmission Protocol for Wearable Healthcare System

An ASIC Solution for Intelligent Electrodes and Active-Cable Used in a Wearable ECG Monitoring System.

An Ultra-Low Power ECG Acquisition and Monitoring ASIC System for WBAN Applications

A 1.0 V 78 μw Reconfigurable ASIC Embedded in an Intelligent Electrode for Continuous Remote ECG Applications

Bio-chip ASIC and Printed Flexible Cable on Paper Substrate for Wearable Healthcare Applications

A High-Efficiency Work-on-Demand SoC with a 0.9V/165 mu W MCU and Dual-Band RF for WBSN

An Energy Efficient Implementation of On-demand MAC Protocol in Medical Wireless Body Sensor Networks.

An Energy-Efficient Soc For Closed-Loop Medical Monitoring And Intervention

A 197.1-μW Wireless Sensor SoC With an Energy-Efficient Analog Front-End and a Harmonic Injection-Locked OOK TX

An Energy Efficient Fully Integrated OOK Transceiver SoC for Wireless Body Area Networks

A Wireless Capsule Endoscope System with Low-Power Controlling and Processing ASIC

Power and Area Efficient Wavelet-Based On-chip ECG Processor for WBAN

A near-threshold, multi-node, wireless body area sensor network powered by RF energy harvesting

A Wireless Miniature Injectable Device with Memory-Assisted Backscatter for Multimodal Animal Physiological Monitoring

An Ultra Low Power Baseband Transceiver IC for Wireless Body Area Network in 0.18- \mu M CMOS Technology

An ultra low power baseband transceiver IC for wireless body area networks

Low-power, intelligent sensor hardware interface for medical data preprocessing

A receiver analog front-end for body sensor network

A Low Power 8-Bit Successive Approximation Register A/D for A Wireless Body Sensor Node