Abstract:An ultra-low power ECG processor ASIC (application specific integrated circuit) with R-wave detection and data compression is presented, which is designed for the long-term implantable cardiac monitoring (ICM) device for arrhythmia diagnosis. An adaptive derivative-based detection algorithm with low computation overhead for potential arrhythmia recording is proposed to detect arrhythmia with the occasional abnormal heart beats. In order to save as much as possible cardiac information with the limited memory size available in the ICM device, a hierarchical data buffer structure is proposed which saves 3 types of data, including the raw ECG data segments of 2 seconds, compressed ECG data segments of 45 seconds, and R-peak values and interval lengths of >2000 beat cycles. A modified swinging-door-trending (SDT) method is proposed for the ECG data compression. The ASIC has been implemented based on fully-customized near-threshold standard cells using the thick-gate transistors in 65-nm CMOS technology for low dynamic power consumption and leakage. The ASIC core occupies a die area of 1.77 mm2. The measured total power is 2.63 μW, which is among the ECG processors with the lowest core power consumption. It exhibits a relatively high positive precision rate (P+) of 99.3% with a sensitivity of 98.2%, in contrast to the similar designs in literature with the same core power consumption level. Also, an ECG data compression ratio (CR) of up to 17.0 has been achieved, with a good trade-off between the compression efficiency and loss.

Power and Area Efficient Wavelet-Based On-chip ECG Processor for WBAN

An Ultra-Low Power ECG Acquisition and Monitoring ASIC System for WBAN Applications

An ASIC Solution for Intelligent Electrodes and Active-Cable Used in a Wearable ECG Monitoring System.

A 1.0 V 78 μw Reconfigurable ASIC Embedded in an Intelligent Electrode for Continuous Remote ECG Applications

A Multi-Parameter Bio-Electric ASIC Sensor with Integrated 2-Wire Data Transmission Protocol for Wearable Healthcare System

A Miniature On-Chip Multi-Functional ECG Signal Processor with 30 &#x00b5;w Ultra-Low Power Consumption

Bio-chip ASIC and Printed Flexible Cable on Paper Substrate for Wearable Healthcare Applications

An Energy-Efficient Design for ECG Recording and R-Peak Detection Based on Wavelet Transform

An Active-Cable Connected ECG Monitoring System for Ubiquitous Healthcare

A Real-Time Ecg Qrs Detection Asic Based On Wavelet Multiscale Analysis

Multiple Functional ECG Signal is Processing for Wearable Applications of Long-Term Cardiac Monitoring

A Dual-Mode ECG Processor with Difference-Insensitive QRS Detection and Lossless Compression

A 410-nW Efficient QRS Processor for Mobile ECG Monitoring in 0.18-μm CMOS

An ECG-on-Chip for Wearable Cardiac Monitoring Devices

An Energy-Efficient ASIC for Wireless Body Sensor Networks in Medical Applications

An Area-Efficient Error-Resilient Ultralow-Power Subthreshold ECG Processor

A Lifting Wavelet Based Lossless and Lossy ECG Compression Processor for Wireless Sensors

A 2.63 μW ECG Processor With Adaptive Arrhythmia Detection and Data Compression for Implantable Cardiac Monitoring Device

An Energy-Efficient ASIC with Real-Time Work-on-demand for Wireless Body Sensor Network

A Low Power Qrs Detection Processor With Adaptive Scaling Of Processing Resolution

A 746 Nw ECG Processor ASIC Based on Ternary Neural Network