Abstract:A soft body area sensor network presents a promising direction in wearable devices to integrate on-body sensors for physiological signal monitoring and flexible printed circuit boards (FPCBs) for signal conditioning/readout and wireless transmission. However, its realization currently relies on various sophisticated fabrication approaches such as lithography or direct printing on a carrier substrate before attaching to the body. Here, we report a universal fabrication scheme to enable printing and room-temperature sintering of the metal nanoparticle on paper/fabric for FPCBs and directly on the human skin for on-body sensors with a novel sintering aid layer. Consisting of polyvinyl alcohol (PVA) paste and nanoadditives in the water, the sintering aid layer reduces the sintering temperature. Together with the significantly decreased surface roughness, it allows for the integration of a submicron-thick conductive pattern with enhanced electromechanical performance. Various on-body sensors integrated with an FPCB to detect health conditions illustrate a system-level example.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c11479?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c11479</a>.Details on the materials, experimental procedures, designs of paper-based FPCB using the SL900A chip, pattern designs of sensors and characterization results of the contact angle, AFM, XRD, SEM, sheet resistance, PPG voltage measuring, and EMG/ECG signal testing (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11479/suppl_file/am0c11479_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Bio-chip ASIC and Printed Flexible Cable on Paper Substrate for Wearable Healthcare Applications

An ASIC Solution for Intelligent Electrodes and Active-Cable Used in a Wearable ECG Monitoring System.

A Multi-Parameter Bio-Electric ASIC Sensor with Integrated 2-Wire Data Transmission Protocol for Wearable Healthcare System

A System-on-chip and Paper-Based Inkjet Printed Electrodes for a Hybrid Wearable Bio-Sensing System

Hybrid Integration Technology For Wearable Sensor Systems

Heterogeneous Integration of Bio-Sensing System-on-Chip and Printed Electronics

An Active-Cable Connected ECG Monitoring System for Ubiquitous Healthcare

Design of a self-organized Intelligent Electrode for synchronous measurement of multiple bio-signals in a wearable healthcare monitoring system

A 1.0 V 78 μw Reconfigurable ASIC Embedded in an Intelligent Electrode for Continuous Remote ECG Applications

Electrical Performance Of Inkjet Printed Flexible Cable For Ecg Monitoring

Intelligent electrode design for long-term ECG monitoring at home: Prototype design using FPAA and FPGA

An Integrated and Conductive Hydrogel-Paper Patch for Simultaneous Sensing of Chemical-Electrophysiological Signals

Bio-Patch Design and Implementation Based on a Low-Power System-on-Chip and Paper-Based Inkjet Printing Technology

A Hybrid Low Power Biopatch for Body Surface Potential Measurement

Battery‐Free and Wireless Epidermal Electrochemical System with All‐Printed Stretchable Electrode Array for Multiplexed in Situ Sweat Analysis

A Novel Wearable ECG Monitoring System Based on Active-Cable and Intelligent Electrodes

Robust Tattoo Electrode Prepared by Paper-Assisted Water Transfer Printing for Wearable Health Monitoring

A non-printed integrated-circuit textile for wireless theranostics

An ECG-on-Chip for Wearable Cardiac Monitoring Devices

Integrated Ink Printing Paper Based Self-Powered Electrochemical Multimodal Biosensing (IFP-Multi ) with ChatGPT-Bioelectronic Interface for Personalized Healthcare Management

Wearable Circuits Sintered at Room Temperature Directly on the Skin Surface for Health Monitoring