Abstract:Flexible hybrid electronics (FHE) integrate both traditional printed circuits, solder assembled standard and thinned silicon chips along with printable electronic materials and sensors. The combination results in high performance from thin, light weight, flexible devices that potentially could be manufactured at low cost. In this paper, flexible hybrid electronics technology is being used to develop a wearable ECG and skin temperature monitor. All components and materials were commercially available, and all fabrication processes were executed in manufacturing environments. The monitor is composed of a flexible polyimide substrate with printed ECG electrodes, a printed thermistor, and connecting traces printed on one surface, and the electronic components mounted on other. Both sides have copper metal circuits connected by copper plated through hole vias (THV). ECG signals are amplified, preconditioned and wirelessly transmitted via Bluetooth to a nearby handheld mobile phone or computer. The wearable monitor is 2x2 inches in size and has been demonstrated to produce high fidelity ECG signals at the host from both certified archived human ECG signals and ECG signals from human volunteers. The monitor reproduced the archived signals at the host from which a set of clinical parameters were calculated that closely matched those of the archived signals. Manufacturing challenges and device reliability will be discussed. Current work includes building upon this platform and integration of other monitoring and sensor devices included those that monitor for biomarkers in sweat. This work was sponsored by the NanoBio Manufacturing Consortium administered by the Flextech Alliance and funded by the US Air Force Research Laboratory.

A System-on-chip and Paper-Based Inkjet Printed Electrodes for a Hybrid Wearable Bio-Sensing System

Heterogeneous Integration of Bio-Sensing System-on-Chip and Printed Electronics

Bio-Patch Design and Implementation Based on a Low-Power System-on-Chip and Paper-Based Inkjet Printing Technology

Hybrid Integration Technology For Wearable Sensor Systems

Bio-chip ASIC and Printed Flexible Cable on Paper Substrate for Wearable Healthcare Applications

A Hybrid Low Power Biopatch for Body Surface Potential Measurement

Battery‐Free and Wireless Epidermal Electrochemical System with All‐Printed Stretchable Electrode Array for Multiplexed in Situ Sweat Analysis

An Integrated and Conductive Hydrogel-Paper Patch for Simultaneous Sensing of Chemical-Electrophysiological Signals

An ASIC Solution for Intelligent Electrodes and Active-Cable Used in a Wearable ECG Monitoring System.

A Multi-Parameter Bio-Electric ASIC Sensor with Integrated 2-Wire Data Transmission Protocol for Wearable Healthcare System

Design of a self-organized Intelligent Electrode for synchronous measurement of multiple bio-signals in a wearable healthcare monitoring system

Robust Tattoo Electrode Prepared by Paper-Assisted Water Transfer Printing for Wearable Health Monitoring

Integrated Ink Printing Paper Based Self-Powered Electrochemical Multimodal Biosensing (IFP-Multi ) with ChatGPT-Bioelectronic Interface for Personalized Healthcare Management

Wearable Circuits Sintered at Room Temperature Directly on the Skin Surface for Health Monitoring

Ionogel Infiltrated Paper As Flexible Electrode for Wearable All-Paper Based Sensors in Active and Passive Modes

Ultra-Sensitive and Stable Multiplexed Biosensors Array in Fully Printed and Integrated Platforms for Reliable Perspiration Analysis

Printable Fabrication of a Fully Integrated and Self-Powered Sensor System on Plastic Substrates

Paper-based wearable electronics

Semi-Disposable Self-Adhesive Sensor System for Wearable Electrocardiogram Detection

A Wearable Flexible Hybrid Electronics ECG Monitor

A 3D Printed Wearable Bioelectronic Patch for Multi‐Sensing and In Situ Sweat Electrolyte Monitoring