Abstract:A printed electronics route for integration of ultrathin chips (chip‐scale) and nanowires (nanoscale) based electronic layers on the same flexible substrate is reported. Direct transfer printing is used for the integration of the ultrathin chips, contact printing is utilized for the integration of the nanowires‐based layers, and the direct ink write method is used for the fabrication of the electrodes/interconnects. Flexible hybrid electronics (FHE) offers potential for fast computation and communication needed in applications such as human–machine interfaces, electronic skin, etc. FHE typically comprises devices that can vary from nano‐ to chip scale, and their integration using a common process is often challenging. Herein, a printed electronics route is presented to integrate the ultrathin chips (chip‐scale) and nanowires (NWs)‐based electronic layers (nanoscale) on the same substrate. The fabrication process is categorized into three stages: i) direct transfer printing of ultrathin chips (UTCs), ii) contact printing of nanoscale structures, and iii) metal printing using the direct ink write (DIW) method to define electrodes/interconnects. The UTC printing process is carefully optimized by studying the performance of transistors present on them. Electrical data collected from 14 transistors located on 3 different chips show negligible variation in performance after they are transfer printed—thus confirming the efficacy of the printing technique. The superior grade quality of ZnO‐NWs‐based electronic layers printed on the same substrate is also demonstrated by constructing UV photodetectors using DIW printing. The photodetectors show high responsivity (≈2 × 107 A W−1) and specific detectivity (≈5 × 1015 Jones) at a low UV intensity of 0.5 μW cm−2.

Heterogeneous Integration of Bio-Sensing System-on-Chip and Printed Electronics

A System-on-chip and Paper-Based Inkjet Printed Electrodes for a Hybrid Wearable Bio-Sensing System

Hybrid Integration Technology For Wearable Sensor Systems

Bio-Patch Design and Implementation Based on a Low-Power System-on-Chip and Paper-Based Inkjet Printing Technology

Bio-chip ASIC and Printed Flexible Cable on Paper Substrate for Wearable Healthcare Applications

Battery‐Free and Wireless Epidermal Electrochemical System with All‐Printed Stretchable Electrode Array for Multiplexed in Situ Sweat Analysis

A Hybrid Low Power Biopatch for Body Surface Potential Measurement

An Integrated and Conductive Hydrogel-Paper Patch for Simultaneous Sensing of Chemical-Electrophysiological Signals

The Research on Integrated Cellular Chip Based on Multifunction Cell-based Biosensor

A Low-Cost, Disposable and Portable Inkjet-Printed Biochip for the Developing World

Integrated Ink Printing Paper Based Self-Powered Electrochemical Multimodal Biosensing (IFP-Multi ) with ChatGPT-Bioelectronic Interface for Personalized Healthcare Management

A Movable Type Bioelectronics Printing Technology for Modular Fabrication of Biosensors.

Monolithically integrated flexible sensing systems with multi-dimensional printable MXene electrodes

Heterogeneous Integration of Thin-Film Organic and Inorganic Devices for Optical Based Bioelectrical and Chemical Sensing

Printable Fabrication of a Fully Integrated and Self-Powered Sensor System on Plastic Substrates

Printing of Nano‐ to Chip‐Scale Structures for Flexible Hybrid Electronics

Hybrid Printing of Fully Integrated Microfluidic Devices for Biosensing

All-printed Multiplexed Electrocatalytic Biosensors with Rationally Designed Nanoparticle Inks

System Integration Of Smart Packages Using Printed Electronics

Printable and Flexible Integrated Sensing Systems for Wireless Healthcare

Wearable Circuits Sintered at Room Temperature Directly on the Skin Surface for Health Monitoring