Abstract:With the development of integrated circuit towards the characteristics of the low-power consumption, miniaturization and high integration, three-dimensional integration technology based on Through-Silicon Via (TSV) comes into being. However, the thermal accumulation caused by the maximum stack density and the thermal stress caused by the mismatched thermal expansion coefficient between TSV surrounding materials will lead to the reliability problems such as circuit function failure and device performance drift. In this paper, the heat dissipation performance and thermal-mechanical reliability of TSV array in 2.5D silicon interposer were studied when the operation temperature is increased from 20°C to 100°C. Firstly, the influences of the geometrical parameters, such as the through hole radius, depth to width ratio, insulation thickness and TSV spacing, on thermal-mechanical reliability were analyzed for single TSV, paired TSV and 3*3 TSV array structures. Secondly, a configuration of TSV regular hexagonal array in silicon interposer is proposed to improve its heat dissipation performance.Our simulation results disclose that the stress is mainly concentrated at the junction where SiO2 layer deviates to copper and silicon substrate deviates to SiO2, which indicates the SiO2 layer is most prone to fracture. The through hole radius should be designed as small as possible to reduce the thermal stress, and a thicker SiO2 insulation layer thickness will induce the better thermal-mechanical stability of TSV. The optimized TSV's depth to width ratio should be set above 5 with the simultaneous consideration of the stress for silicon substrate, insulating layer, filled copper. For multiple TSVs, the spacing should be greater than twice the diameter to eliminate the influence of thermal stress between TSVs. In addition, in the case of the same spacing, the equivalent unit temperature of TSV regular hexagonal array distribution is 2.9°C lower than that of conventional matrix array distribution. The analysis and design of TSV array in 2.5D silicon interposer is promising to offer guideline to the future advanced package development.

Development of a BGA Package Based on Si Interposer with Through Silicon Via

Process Development of A New Tgv Interposer for Wafer Level Package of Inertial Mems Device

SEMICONDUCTOR PACKAGE STRUCTURE HAVING MICRO-ISOLATION CAVITY

Assembly and Testing of Thermal Test Chip on Silicon Interposer with Through Silicon Via

Thermal Performance of 2.5D Packaging with the Through Glass Via (TGV) Interposer

Development of high performance 2.5D packaging using glass interposer with through glass vias

A Rigorous Model for Through-Silicon Vias with Ohmic Contact in Silicon Interposer

Thermal-Mechanical Analysis of TSV Array in 2.5D Silicon Interposer

Thermal analysis and heat dissipation optimization of 3D packaging with TSV interposer

Advanced 3D Through-Si-Via and Solder Bumping Technology: A Review

Microfabrication of Through Silicon Vias (TSV) for 3D SiP

Fabrication and RF Property Evaluation of High-Resistivity Si Interposer for 2.5-D/3-D Heterogeneous Integration of RF Devices

Process Development of Thick Si Interposer for 2.5d Integration of Rf Mems Devices

Design and analysis of an I-shaped TSV structure for 3D SiP

Interfacial Stress in Through Silicon Vias

Thermal and Electrical Characterization of TSV Interposer Embedded with Microchannel for 2.5D Integration of GaN RF Devices

Fabrication and Characterization of Annular Copper Through-Silicon Via for Passive Interposer Applications

The thermal stress analysis in 3D IC integration with TSV interposer

Optimization of Cu protrusion of wafer-to-wafer hybrid bonding for HBM packages application

Interposer Fabrication with Annular Copper Tsv and Multi-Layered Redistribution Layer

Fabrication of Microchannel Embedded Tsv Interposer and Its Influence on Tsv'S Electrical Parameters