Abstract:With the development of integrated circuit towards the characteristics of the low-power consumption, miniaturization and high integration, three-dimensional integration technology based on Through-Silicon Via (TSV) comes into being. However, the thermal accumulation caused by the maximum stack density and the thermal stress caused by the mismatched thermal expansion coefficient between TSV surrounding materials will lead to the reliability problems such as circuit function failure and device performance drift. In this paper, the heat dissipation performance and thermal-mechanical reliability of TSV array in 2.5D silicon interposer were studied when the operation temperature is increased from 20°C to 100°C. Firstly, the influences of the geometrical parameters, such as the through hole radius, depth to width ratio, insulation thickness and TSV spacing, on thermal-mechanical reliability were analyzed for single TSV, paired TSV and 3*3 TSV array structures. Secondly, a configuration of TSV regular hexagonal array in silicon interposer is proposed to improve its heat dissipation performance.Our simulation results disclose that the stress is mainly concentrated at the junction where SiO2 layer deviates to copper and silicon substrate deviates to SiO2, which indicates the SiO2 layer is most prone to fracture. The through hole radius should be designed as small as possible to reduce the thermal stress, and a thicker SiO2 insulation layer thickness will induce the better thermal-mechanical stability of TSV. The optimized TSV's depth to width ratio should be set above 5 with the simultaneous consideration of the stress for silicon substrate, insulating layer, filled copper. For multiple TSVs, the spacing should be greater than twice the diameter to eliminate the influence of thermal stress between TSVs. In addition, in the case of the same spacing, the equivalent unit temperature of TSV regular hexagonal array distribution is 2.9°C lower than that of conventional matrix array distribution. The analysis and design of TSV array in 2.5D silicon interposer is promising to offer guideline to the future advanced package development.

Thermal Performance of 2.5D Packaging with the Through Glass Via (TGV) Interposer

Thermal analysis and heat dissipation optimization of 3D packaging with TSV interposer

High-Frequency Electrothermal Characterization of TSV-Based Power Delivery Network

Development of high performance 2.5D packaging using glass interposer with through glass vias

Thermal-Mechanical Analysis of TSV Array in 2.5D Silicon Interposer

System-Level Analysis of 3D ICs with Thermal TSVs

Investigation of Heat Transfer Performance for Through-Silicon Via Embedded in Micro Pin Fins in 3D Integrated Chips

From 2.5D to 3D Chiplet Systems: Investigation of Thermal Implications with HotSpot 7.0

The Development of Effective Model for Thermal Conduction Analysis for 2.5D Packaging Using TSV Interposer

Recent Progress of TGV Technology for High Performance Semiconductor Packaging

Modeling and Characterization of Joule Heating in Metal Core of Tsv

Thermal-aware Cell and Through-Silicon-via Co-Placement for 3D ICs.

Integrated Manifold Microchannels and Near-Junction Cooling for Enhanced Thermal Management in 3D Heterogeneous Packaging Technology

The thermal stress analysis in 3D IC integration with TSV interposer

Performance and reliability study of TGV interposer in 3D integration

Thermo-Mechanical Reliability Study of Through Glass Vias in 3D Interconnection

Thermal Performance Analysis of Carbon Materials Based TSV in Three Dimensional Integrated Circuits

Coupled Electrical-Thermal-Fluidic Multi-Physics Analysis Of TSV Pin Fin Microchannel In The 3D-Ic

Modeling and Characterization of Annealing Effect on the Cu Protrusion and Thermomechanically Behaviors of Through Glass Via

Thermal Management in Fine-Grained 3-D Integrated Circuits

Thermal and Electrical Characterization of TSV Interposer Embedded with Microchannel for 2.5D Integration of GaN RF Devices