Abstract:2.5D advanced packaging technology is a promising solution for “more than Moore”. TGV interposer has attracted growing attention for the high-frequency applications in 2.5D advanced packaging due to its low dielectric constant and loss tangent, etc. Some typical failure modes of TGV structure were discussed in the previous literatures. However, there is a lack of systematic research on the failure mechanisms of TGV under annealing and thermal shock condition. This paper focused on the failure mechanisms of TGV under different thermal conditions using both experimental and simulation methods. Annealing experiment was carried on the TGV sample at 400 °C for different periods. Crack appeared in the glass at the top corner of TGV after annealed at 400 °C for 5 min. With the increasing annealing period from 5 min to 30 min at 400 °C, the protrusion height of TGV increased from $0.61\ \mu\mathrm{m}$ to $1.21\ \mu \mathrm{m}$ , and the simulated protrusion height increased from $0.50\ \mu \mathrm{m}$ to $0.89\ \mu \mathrm{m}$ . The FEA simulation result showed that stress concentration was located in the top corner of TGV, the stress was 1456.63 MPa at 400 °C for 5 min. TGV samples were subjected to 0, 300, 500 and 1000 cycles under the condition of $-55\ ^{\circ}\mathrm{C}$ to 150 °C. Glass will crack around TGV-RDL after 300 thermal shock cycles. The stress was found concentrated around TGV-RDL according to FEA, which was 370.34 MPa. Crack appeared at the bottom corner of the TGV after 1000 cycles. The equivalent plastic strain at the bottom corner of TGV increased from 1.09 to 3.64 with the cycles increased from 300 to 1000. This article analyzes failure mechanisms of TGV and provides design guidelines for the pretreatment process of TGV. The simulation result offers information for the reliability evaluation of TGV.

Recent Progress of TGV Technology for High Performance Semiconductor Packaging

Characterization of a Semiconductor Packaging System utilizing Through Glass Via (TGV) Technology

Research of Vertical via Based on Silicon, Ceramic and Glass

Advanced 3D Through-Si-Via and Solder Bumping Technology: A Review

Development of high performance 2.5D packaging using glass interposer with through glass vias

Thermal Performance of 2.5D Packaging with the Through Glass Via (TGV) Interposer

Processing Through Glass Via (TGV) Interposers for Advanced Packaging

Performance and reliability study of TGV interposer in 3D integration

Through-silicon-via technology for 3D integration

Through silicon via copper electrodeposition for 3D integration

Cu filling of TSV using various current forms for three‐dimensional packaging application

Fabrication and Filling Quality Optimization of the High Density and Small Size Through Silicon Via Array for Three-Dimensional Packaging

Research on Wafer-Level MEMS Packaging with Through-Glass Vias

Exploration and Analysis of Through-Glass Vias for High-Speed, Low-Loss Vertical Interconnects in Glass-Based 3-D Integrated Circuits

Thermo-Mechanical Reliability Study of Through Glass Vias in 3D Interconnection

Implementation of Air-Gap Through-Silicon-Vias (TSVs) Using Sacrificial Technology

Fabrication and Characterization of Fine Pitch TSV Integration with Self-Aligned Backside Insulation Layer Opening.

Modeling and Characterization of Annealing Effect on the Cu Protrusion and Thermo-mechanically Behaviors of Through Glass Via

Failure Mechanisms Investigation of Through Glass Via (TGV) under Thermal Annealing and Shock

Modeling and Characterization of Annealing Effect on the Cu Protrusion and Thermomechanically Behaviors of Through Glass Via

3D interconnection process development and integration with low stress TSV