Abstract:With the development of integrated circuit towards the characteristics of the low-power consumption, miniaturization and high integration, three-dimensional integration technology based on Through-Silicon Via (TSV) comes into being. However, the thermal accumulation caused by the maximum stack density and the thermal stress caused by the mismatched thermal expansion coefficient between TSV surrounding materials will lead to the reliability problems such as circuit function failure and device performance drift. In this paper, the heat dissipation performance and thermal-mechanical reliability of TSV array in 2.5D silicon interposer were studied when the operation temperature is increased from 20°C to 100°C. Firstly, the influences of the geometrical parameters, such as the through hole radius, depth to width ratio, insulation thickness and TSV spacing, on thermal-mechanical reliability were analyzed for single TSV, paired TSV and 3*3 TSV array structures. Secondly, a configuration of TSV regular hexagonal array in silicon interposer is proposed to improve its heat dissipation performance.Our simulation results disclose that the stress is mainly concentrated at the junction where SiO2 layer deviates to copper and silicon substrate deviates to SiO2, which indicates the SiO2 layer is most prone to fracture. The through hole radius should be designed as small as possible to reduce the thermal stress, and a thicker SiO2 insulation layer thickness will induce the better thermal-mechanical stability of TSV. The optimized TSV's depth to width ratio should be set above 5 with the simultaneous consideration of the stress for silicon substrate, insulating layer, filled copper. For multiple TSVs, the spacing should be greater than twice the diameter to eliminate the influence of thermal stress between TSVs. In addition, in the case of the same spacing, the equivalent unit temperature of TSV regular hexagonal array distribution is 2.9°C lower than that of conventional matrix array distribution. The analysis and design of TSV array in 2.5D silicon interposer is promising to offer guideline to the future advanced package development.

Assembly and Testing of Thermal Test Chip on Silicon Interposer with Through Silicon Via

High-Frequency Electrothermal Characterization of TSV-Based Power Delivery Network

Multiphysics Characterization of Polymer‐filled Through‐silicon Vias (pf‐tsvs) for Three‐dimensional Integration

Electrothermal modelling of through silicon via (TSV) interconnects

Electrothermal Effects in High Density Through Silicon Via (tsv) Arrays

Electrothermal modelling and characterisation of submicron through-silicon carbon nanotube bundle vias for three-dimensional ICs

Thermal-Mechanical Analysis of TSV Array in 2.5D Silicon Interposer

The thermal stress analysis in 3D IC integration with TSV interposer

A 3D Integration Testing Vehicle with TSV Interconnects

Thermal and Electrical Characterization of TSV Interposer Embedded with Microchannel for 2.5D Integration of GaN RF Devices

Fabrication and RF Property Evaluation of High-Resistivity Si Interposer for 2.5-D/3-D Heterogeneous Integration of RF Devices

System-Level Analysis of 3D ICs with Thermal TSVs

Electrical-Thermal Co-Simulation For Through Silicon Via And Active Tier In 3-D Ic

Thermal Resistance Analysis for a High Power 3D Integrated RF Module Based on TSV Interposer

Investigation of Heat Transfer Performance for Through-Silicon Via Embedded in Micro Pin Fins in 3D Integrated Chips

Performance and reliability study of TGV interposer in 3D integration

Reliability Simulation Analysis of TSV Structure in Silicon Interposer under Temperature Cycling

Development of a BGA Package Based on Si Interposer with Through Silicon Via

Exploring modeling and testing approaches for three-dimensional integrated thermal resistance of chiplets

Thermal Stresses of Tsvs with Silicon Post Conductors and Polymer Insulators

Fast Transient Thermal Simulation of 2.5-D Packages on Through Silicon Via Interposer