Abstract:This paper reports a novel oscillation control algorithm for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation (MEAM) technique, which enhances the robustness against the frequency variation of the driving mode, compared to the conventional EAM (CEAM) scheme. In this approach, the carrier voltage exerted on the proof mass is frequency-modulated by the drive resonant frequency. Accordingly, the pick-up signal from the interface circuit involves a constant-frequency component that contains the amplitude and phase information of the vibration displacement. In other words, this informational detection signal is independent of the mechanical resonant frequency, which varies due to different batches, imprecise micro-fabrication and changing environmental temperature. In this paper, the automatic gain control loop together with the phase-locked loop are simultaneously analyzed using the averaging method and Routh–Hurwitz criterion, deriving the stability condition and the parameter optimization rules of the transient response. Then, a simulation model based on the real system is set up to evaluate the control algorithm. Further, the proposed MEAM method is tested using a field-programmable-gate-array based digital platform on a capacitive vibratory gyroscope. By optimizing the control parameters, the transient response of the drive amplitude reveals a settling time of 45.2 ms without overshoot, according well with the theoretical prediction and simulation results. The first measurement results show that the amplitude variance of the drive displacement is 12 ppm in an hour while the phase standard deviation is as low as 0.0004°. The mode-split gyroscope operating under atmospheric pressure demonstrates an outstanding performance. By virtue of the proposed MEAM method, the bias instability and angle random walk are measured to be 0.9° h−1 (improved by 2.4 times compared to the CEAM method) and 0.068° (√h)−1 (improved by 1.4 times), respectively.

An Electrostatic Force Feedback Approach for Extending the Bandwidth of MEMS Vibratory Gyroscope

A Research of the Bandwidth of a Mode-Matching MEMS Vibratory Gyroscope

Fuzzy Sliding-Mode Control of the Electrostatically Tuned Quasi-Zero Stiffness MEMS Accelerometer.

A Slot-Structure MEMS Gyroscope Working at Atmosphere With Tunable Electrostatic Spring Constant

Effects of Structural Dimension Variation on the Vibration of MEMS Ring-Based Gyroscopes

MEMS gyroscopes parametric excitation control scheme with constant resonant frequency

Linear Parametric Amplification/attenuation for MEMS Vibratory Gyroscopes Based on Triangular Area-Varying Capacitors

Drive Mode Control for MEMS Gyroscopes with Electrostatically Tunable Structure

Constant-frequency Oscillation Control for Vibratory Micro-Machined Gyroscopes

Linear Parametric Amplification /attenuation Without Spring Hardening /softening Effect in MEMS Gyroscopes

Bandwidth optimization design of a multi degree of freedom MEMS gyroscope

Force Rebalance Controller Synthesis for A Micromachined Vibratory Gyroscope Based on Sensitivity Margin Specifications

A novel oscillation control for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation technique

Electromechanical Analysis of Microelectromechanical Structures and Dynamic Simulations of Laterally Vibratory Microgyroscope

MEMS Gyroscope Control System Using a Band-Pass Continuous-Time Sigma-Delta Modulator

System-level Simulation of a Micromachined Electrostatically Suspended Gyroscope.

Design of a Micro-Electro Mechanical System Quad Mass Gyroscope with Compliant Mechanical Amplification

A New Self-Oscillation Loop for MEMS Vibratory Gyroscopes

System Modeling of a MEMS Vibratory Gyroscope and Integration to Circuit Simulation

System-level simulation of levitation control for a micromachined electrostatically suspended gyroscope