Abstract:This paper reports a novel oscillation control algorithm for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation (MEAM) technique, which enhances the robustness against the frequency variation of the driving mode, compared to the conventional EAM (CEAM) scheme. In this approach, the carrier voltage exerted on the proof mass is frequency-modulated by the drive resonant frequency. Accordingly, the pick-up signal from the interface circuit involves a constant-frequency component that contains the amplitude and phase information of the vibration displacement. In other words, this informational detection signal is independent of the mechanical resonant frequency, which varies due to different batches, imprecise micro-fabrication and changing environmental temperature. In this paper, the automatic gain control loop together with the phase-locked loop are simultaneously analyzed using the averaging method and Routh–Hurwitz criterion, deriving the stability condition and the parameter optimization rules of the transient response. Then, a simulation model based on the real system is set up to evaluate the control algorithm. Further, the proposed MEAM method is tested using a field-programmable-gate-array based digital platform on a capacitive vibratory gyroscope. By optimizing the control parameters, the transient response of the drive amplitude reveals a settling time of 45.2 ms without overshoot, according well with the theoretical prediction and simulation results. The first measurement results show that the amplitude variance of the drive displacement is 12 ppm in an hour while the phase standard deviation is as low as 0.0004°. The mode-split gyroscope operating under atmospheric pressure demonstrates an outstanding performance. By virtue of the proposed MEAM method, the bias instability and angle random walk are measured to be 0.9° h−1 (improved by 2.4 times compared to the CEAM method) and 0.068° (√h)−1 (improved by 1.4 times), respectively.

Linear Parametric Amplification/attenuation for MEMS Vibratory Gyroscopes Based on Triangular Area-Varying Capacitors

Linear Parametric Amplification /attenuation Without Spring Hardening /softening Effect in MEMS Gyroscopes

Analysis of the Frequency-Dependent Vibration Rectification Error in Area-Variation-Based Capacitive MEMS Accelerometers.

Effects of Non-Ideal Frequency Splits on Linear Parametric Resonance in MEMS Mode-Split Gyroscopes

MEMS gyroscopes parametric excitation control scheme with constant resonant frequency

A Novel Triangular-Electrode Based Capacitive Sensing Method for MEMS Resonant Devices

A Robust Triangular-Electrode Based Capacitive Detection Method For Mems Gyroscopes

An Improved Phase-Robust Configuration for Vibration Amplitude-Phase Extraction for Capacitive MEMS Gyroscopes

Linear stiffness tuning of MEMS triangular capacitors

Identification and Suppression of Driving Force Misalignment Angle for a MEMS Gyroscope Using Parametric Excitation

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

Effects of Structural Dimension Variation on the Vibration of MEMS Ring-Based Gyroscopes

A Sub-0.1°/H Bias-Instability MEMS Gyroscope Using Resonant Constant-Frequency Driving Technique

A Stiffness-Tunable MEMS Accelerometer

Temperature-dependence improvement for a MEMS gyroscope using triangular-electrode based capacitive detection method

Drive Mode Control for MEMS Gyroscopes with Electrostatically Tunable Structure

Real-time Correction of Gain Nonlinearity in Electrostatic Actuation for Whole-Angle Micro-Shell Resonator Gyroscope

Design of a Micro-Electro Mechanical System Quad Mass Gyroscope with Compliant Mechanical Amplification

A novel oscillation control for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation technique

A Force Rebalanced Micro-Gyroscope Driven by Voltages Oscillating at Half of Structure’s Resonant Frequency

Transient response and stability of the AGC-PI closed-loop controlled MEMS vibratory gyroscopes