Abstract:This paper reports a novel oscillation control algorithm for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation (MEAM) technique, which enhances the robustness against the frequency variation of the driving mode, compared to the conventional EAM (CEAM) scheme. In this approach, the carrier voltage exerted on the proof mass is frequency-modulated by the drive resonant frequency. Accordingly, the pick-up signal from the interface circuit involves a constant-frequency component that contains the amplitude and phase information of the vibration displacement. In other words, this informational detection signal is independent of the mechanical resonant frequency, which varies due to different batches, imprecise micro-fabrication and changing environmental temperature. In this paper, the automatic gain control loop together with the phase-locked loop are simultaneously analyzed using the averaging method and Routh–Hurwitz criterion, deriving the stability condition and the parameter optimization rules of the transient response. Then, a simulation model based on the real system is set up to evaluate the control algorithm. Further, the proposed MEAM method is tested using a field-programmable-gate-array based digital platform on a capacitive vibratory gyroscope. By optimizing the control parameters, the transient response of the drive amplitude reveals a settling time of 45.2 ms without overshoot, according well with the theoretical prediction and simulation results. The first measurement results show that the amplitude variance of the drive displacement is 12 ppm in an hour while the phase standard deviation is as low as 0.0004°. The mode-split gyroscope operating under atmospheric pressure demonstrates an outstanding performance. By virtue of the proposed MEAM method, the bias instability and angle random walk are measured to be 0.9° h−1 (improved by 2.4 times compared to the CEAM method) and 0.068° (√h)−1 (improved by 1.4 times), respectively.

Drive Mode Control for MEMS Gyroscopes with Electrostatically Tunable Structure

MEMS gyroscopes parametric excitation control scheme with constant resonant frequency

Constant-frequency Oscillation Control for Vibratory Micro-Machined Gyroscopes

A Slot-Structure MEMS Gyroscope Working at Atmosphere With Tunable Electrostatic Spring Constant

A Sub-0.1°/H Bias-Instability MEMS Gyroscope Using Resonant Constant-Frequency Driving Technique

Identification and Suppression of Driving Force Misalignment Angle for a MEMS Gyroscope Using Parametric Excitation

Fuzzy Sliding-Mode Control of the Electrostatically Tuned Quasi-Zero Stiffness MEMS Accelerometer.

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

A Robust Triangular-Electrode Based Capacitive Detection Method For Mems Gyroscopes

Analysis on Digital Automatic Gain Control of MEMS Gyro Driven-Loop Circuit

Design and Test of MEMS Gyroscope Control System Based on LMSD

Frequency Tuning Control for the Drive Mode of a Bulk Z-axis Micro-machined Gyroscope

A Novel Triangular-Electrode Based Capacitive Sensing Method for MEMS Resonant Devices

A Stiffness-Tunable MEMS Accelerometer

Digital Closed-Loop Control Based on Adaptive Filter for Drive Mode of a MEMS Gyroscope

A novel oscillation control for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation technique

An Interface ASIC for MEMS Vibratory Gyroscopes with Nonlinear Driving Control

A control and readout circuit with capacitive mismatch auto-compensation for MEMS vibratory gyroscope

A Digital Interface ASIC for Triple-Axis MEMS Vibratory Gyroscopes

An Electrical-Coupling-suppressing MEMS Gyroscope with Feed-Forward Coupling Compensation and Scalable Fuzzy Control

MEMS Gyroscope Temperature Compensation Based on Drive Mode Vibration Characteristic Control