Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

Fuzzy Sliding-Mode Control of the Electrostatically Tuned Quasi-Zero Stiffness MEMS Accelerometer.

A Stiffness-Tunable MEMS Accelerometer

Stabilization Control of a MEMS Accelerometer With Tuned Quasi-Zero Stiffness

Drive Mode Control for MEMS Gyroscopes with Electrostatically Tunable Structure

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

A Stiffness-tunable MEMS Accelerometer with In-operation Drift Compensation

Temperature Drift Compensation of a Tuned Low Stiffness MEMS Accelerometer Based on Double-Sided Parallel Plates

Novel control strategy of force-balance accelerometers for measurement error minimization

Adaptive Sliding-Mode Control with Self-Tuning Fuzzy Compensation for a Piezoelectric-Actuated X-Y-Z Table

Adaptive Fuzzy Sliding Mode Control of MEMS Gyroscope with Finite Time Convergence.

Tracking Control of a Piezo Actuated System using Fuzzy Sliding-Mode Control with Feedforward Compensation

A self-centering and stiffness-controlled MEMS accelerometer

Adaptive control of MEMS gyroscope using global fast terminal sliding mode control and fuzzy-neural-network

Dynamical Analysis, Circuit Design, and Fuzzy Prescribed Performance Backstepping Control of the FO Weakly Coupled MEMS Resonators

Stiffness Adjustable Optical MEMS Accelerometer

Adaptive global fast terminal sliding mode control of MEMS gyroscope using fuzzy-neural-network

Fuzzy Adaptive Sliding Mode Control for the Precision Position of Piezo-Actuated Nano Positioning Stage

A Tunable Quasi-Zero Stiffness Mechanism For Thermal Compensation Of A Mems Gravimeter

Coupled Double Closed-Loop Control for an MEMS Resonant Accelerometer

Adaptive nonsingular terminal sliding mode control of MEMS gyroscope based on backstepping design

An Electrical-Coupling-suppressing MEMS Gyroscope with Feed-Forward Coupling Compensation and Scalable Fuzzy Control