Abstract:This paper reports a novel oscillation control algorithm for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation (MEAM) technique, which enhances the robustness against the frequency variation of the driving mode, compared to the conventional EAM (CEAM) scheme. In this approach, the carrier voltage exerted on the proof mass is frequency-modulated by the drive resonant frequency. Accordingly, the pick-up signal from the interface circuit involves a constant-frequency component that contains the amplitude and phase information of the vibration displacement. In other words, this informational detection signal is independent of the mechanical resonant frequency, which varies due to different batches, imprecise micro-fabrication and changing environmental temperature. In this paper, the automatic gain control loop together with the phase-locked loop are simultaneously analyzed using the averaging method and Routh–Hurwitz criterion, deriving the stability condition and the parameter optimization rules of the transient response. Then, a simulation model based on the real system is set up to evaluate the control algorithm. Further, the proposed MEAM method is tested using a field-programmable-gate-array based digital platform on a capacitive vibratory gyroscope. By optimizing the control parameters, the transient response of the drive amplitude reveals a settling time of 45.2 ms without overshoot, according well with the theoretical prediction and simulation results. The first measurement results show that the amplitude variance of the drive displacement is 12 ppm in an hour while the phase standard deviation is as low as 0.0004°. The mode-split gyroscope operating under atmospheric pressure demonstrates an outstanding performance. By virtue of the proposed MEAM method, the bias instability and angle random walk are measured to be 0.9° h−1 (improved by 2.4 times compared to the CEAM method) and 0.068° (√h)−1 (improved by 1.4 times), respectively.

A Research of the Bandwidth of a Mode-Matching MEMS Vibratory Gyroscope

A MICROMECHANICAL MODE-MATCHED GYROSCOPE USING STIFFNESS NONLINEARITY AND ELECTROSTATIC TUNING

An Electrostatic Force Feedback Approach for Extending the Bandwidth of MEMS Vibratory Gyroscope

A Slot-Structure MEMS Gyroscope Working at Atmosphere With Tunable Electrostatic Spring Constant

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

A Sub-0.1°/H Bias-Instability MEMS Gyroscope Using Resonant Constant-Frequency Driving Technique

Fuzzy Sliding-Mode Control of the Electrostatically Tuned Quasi-Zero Stiffness MEMS Accelerometer.

A Micro-Machined Silicon Vibrating Ring Gyroscope

Bandwidth optimization design of a multi degree of freedom MEMS gyroscope

A sub 0.8 degree per hour mode-matching MEMS vibratory gyroscope with closed loop control for the sense mode

A MEMS Vibratory Gyroscope With Real-Time Mode-Matching and Robust Control for the Sense Mode

The Bandwidth Characteristics Analysis of a Vibratory Micromachined Gyroscope

Mode-matching control system design of silicon MEMS gyroscope

An In-Run Automatic Mode-Matching Method With Amplitude Correction and Phase Compensation for MEMS Disk Resonator Gyroscope

MEMS Gyroscope Automatic Real-Time Mode-Matching Method Based on Phase-Shifted 45° Additional Force Demodulation

High performance electromagnetic micro-machined ring vibration gyroscope

A Novel Mechanical Frequency Tuning Method Based on Mass-Stiffness Decoupling for MEMS Gyroscopes

A Real-Time Automatic Mode-Matching Method Based on Phase-Shifted Virtual Coriolis Force for MEMS Disk Resonator Gyroscope

In-Run Mode-Matching of MEMS Gyroscopes Based on Power Symmetry of Readout Signal in Sense Mode

Automatic Frequency Tuning Technology For Dual-Mass Mems Gyroscope Based On A Quadrature Modulation Signal

A novel oscillation control for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation technique