Abstract:We prepared amorphous indium–gallium–zinc oxide (a-IGZO) thin films with various Ga content ratios and investigated their feasibility as the active channel layers of top-gate thin-film transistors (TFT). First, the 2-inch IGZO sputtering targets with stoichiometric ratios of InGaZn2O5, InGaZnO4, and InGa2ZnO5.5 were fabricated using In2O3, Ga2O3, and ZnO oxide powders as raw materials via sintering treatments at temperatures ranging from 900 °C to 1300 °C for 6 h or 8 h. X-ray diffraction analysis indicated that the InGaZn2O5 and InGaZnO4 targets are single-phase structures whereas the InGa2ZnO5.5 target is a two-phase structure. Hall effect measurement indicated that the a-InGaZn2O5 and a-InGaZnO4 layers possess a carrier concentration (N) of about 1019 cm−3 and a resistivity (ρ) of about 10−2 Ω·cm; however, the N of the a-InGa2ZnO5.5 layer is only 1017 cm−3, and the ρ is about 1 to 4 Ω·cm. Moreover, the a-InGaZn2O5 layer exhibited the highest Hall-effect mobility (μHall) of 21.17 cm2·V−1·sec−1. This indicated that the impedance of Ga3+ ions to carrier migration is the main factor affecting the electrical properties of a-IGZO layers. Ga content in the a-IGZO channel similarly affects the performance of the TFT devices prepared in this study. The annealing at 300 °C for 1 h in an ambient atmosphere was found to significantly improve the electrical properties of the TFT devices. The best performance was observed in the a-InGaZnO4 TFT sample subjected to post-annealing at 300 °C with Vth = −0.85 V, μFE = 8.46 cm2, V−1·sec−1, SS = 2.31, V·decade−1, and Ion/Ioff = 2.9 × 104.

Amorphous zinc-doped indium oxide channel layers prepared by DC reactive magnetron sputtering

Indium zinc oxide semiconductor thin films deposited by dc magnetron sputtering at room temperature

Amorphous indium zinc oxide thin film transistors with poly-4-vinylphenol gate dielectric layers

Structural, Electrical, and Optical Properties of ZnInO Alloy Thin Films

Amorphous IZO-based transparent thin film transistors

Electrical Properties of Indium Aluminum Zinc Oxide Thin Film Transistors

Fabrication of Transparent Indium Zinc Oxide Thin Film Transistors by Sol-gel Technology

Organic Dielectric Indium Zinc Oxide Thin Film Transistors

Fabrication and performance of indium oxide based transparent thin film transistors

Sol–gel processed indium zinc oxide thin film and transparent thin-film transistors

High‐Performance Thin‐Film Transistors with Nickel‐Doped Indium Zinc Oxide Channel Layers

Realization of high transparent mobility zinc‐doped indium oxide (IZO) thin films by RF‐magnetron sputtering

Study of zinc tin oxide thin-film transistor

Influence of the Channel Layer Thickness on Electrical Properties of Indium Zinc Oxide Thin-Film Transistor

The Fabrication of Indium–Gallium–Zinc Oxide Sputtering Targets with Various Gallium Contents and Their Applications to Top-Gate Thin-Film Transistors

High-Performance Dual-Layer Channel Indium Gallium Zinc Oxide Thin-Film Transistors Fabricated In Different Oxygen Contents At Low Temperature

Dip-coated Al–In–Zn–O Thin-Film Transistor with Poly-Methylmethacrylate Gate Dielectric

Thin Film Transistor Using Amorphous InGaZnO Films as Both Channel and Source/Drain Electrodes

Self-Assembled Transparent A-Igzo Based Tfts for Flexible Sensing Applications

Influence of Double Channel Layers on the Performance of Nitrogen Doped Indium-zinc-oxide Thin Film Transistors

Amorphous indium–gallium–zinc–oxide thin-film transistors using organic–inorganic hybrid films deposited by low-temperature plasma-enhanced chemical vapor deposition for all dielectric layers