Abstract:This paper reports a novel bi-stable structure for a radio frequency micro-electro-mechanical system (RF MEMS) switch. The structure is activated by an in-plane electrostatic actuator and adopts the Inertial Generated Timing Sequence (IGTS) method to latch, allowing the switch to turn on and off with a simple pulse signal. This design eliminates the need for a complex external control circuit and enables the switch to maintain the ON state at zero power consumption. Furthermore, the electrode shape is designed to reduce the driving voltage, thereby lowering the power consumption of the boost circuit. To test and verify the functionality of the bi-stable mechanism, a coplanar waveguide (CPW), which is separated from the actuation structure to reduce interference between the DC drive signal and the RF transmitted signal, is employed. Fabricated using a silicon-on-glass process with two lithographic masks, the RF MEMS switch achieves bi-stability with a single pulse signal of 18V for latching and 14V for unlatching. The measured insertion loss and isolation at 6 GHz are $-$ 0.28 dB and $-$ 36.68 dB, respectively. This switch exhibits low pull-in voltage, low power consumption, and simple control, holding potential for future RF systems tailored to wireless applications with an emphasis on low power consumption and system simplicity. 2024-0008

DC-contact radio-frequency microelectromechanical system symmetric toggle switch on a borofloat substrate

DC-contact Series Radio-Frequency Micro Electromechanical System Switch with Slanting Beams

Multi-contact Radiofrequency Microelectromechanical Systems Switch with Power Divider/combiner Structure for High Power Applications

LiNbO_3 based asymmetrical electrode 1×2 Y-branch digital optical switch

Asymmetrical Electrode Digital Optical Switch

An Ultra-Broadband Contact-Capacitive RF MEMS Switch for 15-110GHZ Applications

Design and Fabrication of DC to 30 GHz DC-contact Shunt RF MEMS Switch

Novel Multicontact Radio Frequency Microelectromechanical System Switch in High-Power–handling Applications

Al/Au Composite Membrane Bridge DC-contact Series RF MEMS Switch

Electro-thermally actuated RF MEMS switch for wireless communication.

Design and Analysis of a Lateral Lateral DC-Contact MEMS RF Switch with High Performance

Thermopneumatic Liquid Metal Radiofrequency Switch Actuated by Low‐Boiling‐Point Fluid

A dielectric-bridge-type MEMS series contact switch for 0-10GHz applications

A Planar Single-Actuator Bi-Stable Mechanical/Electrical Switch

A High-Linearity SP12T RF MEMS Switch Using Parallel Dual-Cantilevers for 5G and Beyond Applications

Power Handling Capability Enhanced RF MEMS Switch Using Modified-Width Cantilevers Structure

Low-voltage Micromachining-Based Scalable Optical Switch

An Approach to Near Zero Power Bi-Stable Driving With a Simple Pulse Signal for RF MEMS Switch

Design and simulation of a novel electro-thermally actuated lateral RF MEMS latching switch for low power applications

Design and fabrication of X-band capacitive MEMS switches

A Zero Static Power Consumption Bi-Stable RF MEMS Switch Based on Inertial Generated Timing Sequence Method