Abstract:Biomass is a renewable and potentially carbon-neutral energy source and can be a promising alternative to fossil fuels in the ironmaking industry. The co-carbonization technology of biomass and coal for high-quality biofuel production has great potential. This study investigated the effects of the addition of magnetite (Fe3O4) on the physicochemical properties and combustion performance of wood shavings (WS) and bituminous coal (BC) (WS/ BC = 4/6) sintered with a carbon-based synfuel. The results indicate that increasing the proportion of 2 wt% Fe3O4 can increase the high calorific value to 34.60 MJ kg- 1 and the maximum combustion rate temperature reaches 469 degrees C, however, increasing the proportion decreases the burnout temperature to 575 degrees C, and the activation energy of the rapid pyrolysis stage decreases to 43.54 kJ mol- 1. In addition, the activation energies of WS/BC char in the fast co-pyrolysis stage and the combustion reaction decrease significantly to 43.54 kJ mol- 1 and 92.96 kJ mol- 1, respectively, with the addition of 2 wt% Fe3O4. The area ratio of the fitted aromatic C-O reaches 79.91 %. Fe3O4 can form active centers on the surface of a carbon-based synfuel, improving the stability and orderliness of the fuel. The catalysis of the Fe3O4 additive with macromolecular organic compounds involves mainly oxygen-containing functional groups, promoting the cleavage of C-C bonds connected to oxygencontaining functional groups. In general, these results provide certain theoretical guidance for the preparation and application of sintered carbon-based synfuels.

Combustion Synthesis of VC/Fe Composites under the Action of an Electric Field

Combustion Synthesis of TiC–Fe Composites under the Action of an Electric Field

Combustion Synthesis of Fe-Ti-C System by Electric Field Inducement: Effect of Electric Current on the Synthesis Products

Effect of Pressure on Combustion Synthesis of TiC/Fe-Cu Composites under the Action of Electric Current

Microstructure evolution of Fe-Ti-C system synthesized by low temperature combustion induced in electric field

Influence of an electric field on combustion synthesis process and microstructures of TiC–Al2O3–Al composites

Microstructure Formation Mechanism of the Combustion Synthesis of TiC-Al_2O_3-Al Composites under Electric Field

Effect of current application methods on the preparation of Fe–Al intermetallic compounds by field-activated combustion synthesis

Characteristic and Mechanistic Study of Enhanced Carbon-Based Synfuel from Biomass and Coal by Magnetite Additive for Synergistic Co-Carbonization Technology.

Study on the Dense Tic-Al2o3-Al Composites by Electric Field-Activated Combustion Synthesis

IN-SITU SYNTHESIS AND GROWTH OF SPHERICAL VC PARTICLES IN Fe-C-Cr-V ALLOY

Combustion synthesis of zinc ferrite powders

Combustion synthesis and characterization of NiCuZn ferrite powders

A new method of synthesizing ultrafine vanadium carbide by dielectric barrier discharge plasma assisted milling

Microstructures, Densification and Mechanical Properties of TiC–Al2O3–Al Composite by Field-Activated Combustion Synthesis

Microstructure, Microhardness and Wear Resistance of VCp/Fe Surface Composites Fabricated in Situ

Combustion Synthesis and Magnetic Investigation of Nanosized CoFe2O4

Synthesis of Fe2O3/Al Nanocomposite and Research on Its Thermite Reaction

Fabrication and microstructure of in situ vanadium carbide ceramic particulates-reinforced iron matrix composites

Effect of an external electric field on the combustion synthesis process of TiO2-C-Al system

Microstructure and Formation Mechanism of Vanadium Carbide-Reinforced Iron-Matrix Composites Prepared by Solid-Phase Diffusion