Abstract:In order to achieve combustion synthesis (CS) of high-density and fine-structured TiC–Al2O3–Al composites, the activation of combustion reactions of 3TiO2–3C–(4+x) Al system with x≥10mol was conducted by means of external electric field. During the field-activated combustion synthesis (FACS), liquid Al in excess stoichiometric amount was generated and it infiltrated into the synthesized TiC–Al2O3 ceramic matrix with porosities, which directly results in a dense TiC–Al2O3–Al composites. The influence of electric field on CS process of the reactive system and the resulting microstructures of TiC–Al2O3–Al composites was investigated. The results show that an external electric field can effectively improve the adiabatic combustion temperature of the reactive system. Therefore a self-sustaining combustion of the system can be induced thermodynamically. In the experiments, both practical combustion temperature and propagation velocity of combustion wave were obviously enhanced with increasing field strength, whereas sizes of the synthesized TiC and Al2O3 particles were significantly decreased at the same time. Under an electric field of 25Vcm−1, TiC–Al2O3–Al composites with a relative density of 92.5% was successfully fabricated through the combustion reaction in the system with x=14mol, in which TiC and Al2O3 particles possess fine-structured sizes of 0.2–1.0μm, with uniform distribution in metal Al.

Combustion Synthesis of Fe-Ti-C System by Electric Field Inducement: Effect of Electric Current on the Synthesis Products

Combustion Synthesis of TiC–Fe Composites under the Action of an Electric Field

Microstructure evolution of Fe-Ti-C system synthesized by low temperature combustion induced in electric field

Effect of an external electric field on the combustion synthesis process of TiO2-C-Al system

Effect of Pressure on Combustion Synthesis of TiC/Fe-Cu Composites under the Action of Electric Current

Influence of an electric field on combustion synthesis process and microstructures of TiC–Al2O3–Al composites

Microstructure Formation Mechanism of the Combustion Synthesis of TiC-Al_2O_3-Al Composites under Electric Field

Combustion Synthesis of VC/Fe Composites under the Action of an Electric Field

Effect of Fe on the Phases and Microstructure of TiC–Fe Cermets by Combustion Synthesis/quasi-Isostatic Pressing

Mechanosynthesis Mechanism of Tic Powders

Study on the Dense Tic-Al2o3-Al Composites by Electric Field-Activated Combustion Synthesis

Numerical Simulation of In Situ Reaction Synthesis of TiC-Reinforced Steels from Elemental Fe-Ti-C Powders

Combinatorial synthesis of multiple Zr Ti1-C by electric field-assisted combustion synthesis

Effect of current application methods on the preparation of Fe–Al intermetallic compounds by field-activated combustion synthesis

Effects of particle size of reactant on characteristics of combustion synthesis of TiC-Fe cermet

Microstructural evolution of the titanium particles in the in-situ composition of TiC–Fe by the combustion synthesis

Microstructural evolution during combustion synthesis of TiC-Fe cermet

Effect of Combustion Temperature on Combustion Synthesis of Ti3AlC2 and Ti2AlC

Formation Mechanism of Spherical TiC in Ni-Ti-C System during Combustion Synthesis

Combustion Synthesis of Tinxc1-X Powders with Ultra Fine Particle Size by Using Titanium Oxide As Dilution

Effects of Tic Addition on Combustion Synthesis of Ti(2)Alc Powders