Abstract:Ti1−xWxC solid solution powders have been prepared by combustion synthesis in two reaction modes of self-propagating high-temperature synthesis (SHS) and thermal explosion (TE). The reaction mechanism in combustion synthesis is investigated and the effects of processing parameters are discussed. Two reaction paths are proposed for the formation of the Ti1−xWxC solid solution. In path 1, Ti1−xWxC crystals are directly precipitated from Ti-W-C melt, and in path 2 the Ti1−xWxC phase is formed by solid-state reaction between TiC and WC. The availability of the two reaction paths depends on the x value and reaction temperature. For smaller x values and higher temperatures, the reaction path 1 dominates and almost full conversion is achieved. For larger x values and lower temperatures, however, path 2 becomes dominant. In path 2, the rate-limiting step is the formation of WC by slow diffusion-controlled solid-state reaction between W and C, which is unable to be completed during the short reaction period and results in the presence of W2C and unreacted W in the products. The reaction between W and C cannot be improved by the addition of excessive C, but can be promoted by using carbon black instead of graphite powder as C source or carrying out the synthesis in a high-pressure N2 atmosphere instead of vacuum. In the fast combustion reaction with high heating/cooling rates, a non-equilibrium state is likely to be created because the mass transfer and energy exchange are limited. The non-equilibrium condition has a strong influence on the reaction kinetics, where the decomposition of W2C is avoided, a localized compositional heterogeneity is caused, and ultrafine grains on a submicron scale are obtained in the products.

Study on the Effect of Tungsten Content and Preheat Temperature on Combustion-Synthesized Product in Ti-W-C System

Self-propagating high-temperature synthesis in Ti-W-C system

The Effect of A Small Amount of Tungsten on the Microstructure of Mechanically Alloyed Ag37cu63

Effects of different Ti/C and Al contents on combustion synthesized Ti3AlC2 powders in the Ti-Al-C system

Effects of different Al contents on combustion synthesis of Ti3AlC2 powders in the Ti-Al-C system

Effects of carbon contents on combustion synthesis of Ti2AlC powders

Reaction Path in Formation of Ti1−xWxC Solid Solution by Combustion Synthesis

Effects of Tic Addition on Combustion Synthesis of Ti(2)Alc Powders

Effects of Tial3 Addition in Ti-Al-C System on Combustion Synthesis of Ti3alc2 Powders

Effect of Combustion Temperature on Combustion Synthesis of Ti3AlC2 and Ti2AlC

Effects of TiAl3 addition on combustion synthesis of Ti3AlC

Mechanosynthesis Mechanism of Tic Powders

Combustion Synthesis of Tib2-Tic-Wb Powders by Coupling Weak with Strong Exothermic Reactions

Effects of TiAl additions on combustion synthesis of Ti3AlC2 powders

Study on influencing factors and mechanism of high-quality tungsten carbide nanopowders synthesized via carbothermal reduction

Synthesis and Formation Mechanism of W/TiC Composite Powders by a Wet Chemical Route

Study on the Synthesis of Ti3AlC Powder by Combustion

Preparation and characterization of TiB2-Al2O3 composite powder by combustion synthesis process

The effect of Cu content and Ti2Cu precipitation on the combustion behaviour and mechanism of Ti-xCu alloys

EFFECTS OF TiAl ADDITION ON COMBUSTION SYNTHESIS OF Ti_2AlC

Combustion synthesis of (TiC+SiC) composite powders by coupling strong and weak exothermic reactions