Abstract:Ti1−xWxC solid solution powders have been prepared by combustion synthesis in two reaction modes of self-propagating high-temperature synthesis (SHS) and thermal explosion (TE). The reaction mechanism in combustion synthesis is investigated and the effects of processing parameters are discussed. Two reaction paths are proposed for the formation of the Ti1−xWxC solid solution. In path 1, Ti1−xWxC crystals are directly precipitated from Ti-W-C melt, and in path 2 the Ti1−xWxC phase is formed by solid-state reaction between TiC and WC. The availability of the two reaction paths depends on the x value and reaction temperature. For smaller x values and higher temperatures, the reaction path 1 dominates and almost full conversion is achieved. For larger x values and lower temperatures, however, path 2 becomes dominant. In path 2, the rate-limiting step is the formation of WC by slow diffusion-controlled solid-state reaction between W and C, which is unable to be completed during the short reaction period and results in the presence of W2C and unreacted W in the products. The reaction between W and C cannot be improved by the addition of excessive C, but can be promoted by using carbon black instead of graphite powder as C source or carrying out the synthesis in a high-pressure N2 atmosphere instead of vacuum. In the fast combustion reaction with high heating/cooling rates, a non-equilibrium state is likely to be created because the mass transfer and energy exchange are limited. The non-equilibrium condition has a strong influence on the reaction kinetics, where the decomposition of W2C is avoided, a localized compositional heterogeneity is caused, and ultrafine grains on a submicron scale are obtained in the products.

Combustion Synthesis of Tib2-Tic-Wb Powders by Coupling Weak with Strong Exothermic Reactions

Combustion synthesis of (TiC+SiC) composite powders by coupling strong and weak exothermic reactions

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

Preparation and characterization of TiB2-Al2O3 composite powder by combustion synthesis process

Reaction Path in Formation of Ti1−xWxC Solid Solution by Combustion Synthesis

PREPARATION OF TIB2/TIC CERAMIC COMPOSITES BY HIGH-GRAVITY COMBUSTION SYNTHESIS

The Process of TiB 2 −cu Composite Phase and Structure Formation During Combustion Synthesis

Combustion synthesis of Ti(C, N) TiB2 composite powders under super gravity conditions

Study of Patterns and Mechanisms of Combustion of a Powdered and Granulated Ti–C–B System

Combustion Synthesis of Ti(C,N)-TiB_2 Composite Powders under Super Gravity Conditions

Synthesis and Formation Mechanism of W/TiC Composite Powders by a Wet Chemical Route

Combustion Synthesis of TiCxN1−x–TiB2 Ceramic Composites in a High-Gravity Field

Study on the Effect of Tungsten Content and Preheat Temperature on Combustion-Synthesized Product in Ti-W-C System

Synthesis of Al{sub 2}o{sub 3}-Tic and Al{sub 2}o{sub 3}-Tib{sub 2} Composite Powders by Combustion Method

Mechanosynthesis Mechanism of Tic Powders

B4C‒TiB2 composite with modified microstructure and enhanced properties from optimal size coupling of raw powders

Combustion Synthesis Ternary Carbide Ti2alc1-X Powders

Synthesis of Al2O3-WSi2-WB2-WB composite in Al-Si-WO3-B2O3 system by self-propagating high-temperature synthesis

TiB₂-Based Composites for Ultra-High-Temperature Devices, Fabricated by SHS, Combining Strong and Weak Exothermic Reactions

Self-propagating high-temperature synthesis in Ti-W-C system

Microstructure and mechanical properties of B4C–TiB2 ceramic composites prepared via a two-step method