Abstract:The quasi-static consolidation in uniaxial compression of combustion synthesized TiB2–Cu composite with 40 wt.% Cu from Ti, B and Cu powders was investigated. Thermodynamics of the system was calculated theoretically. It was found that TiB2 was a stable phase in the composite and TiCu interphase compound can convert into stable phase. The phases of the synthesized product were identified using X-ray diffraction and the results showed only TiB2 and Cu phases, no other phases existed in the product. It is consistent with the calculated result of thermodynamics. The consolidated product was dense and no apparent pores existed in the microstructure. Fine TiB2 reinforcement grows in near equivalent axis-like and block-like shapes. As a binder phase, copper metal was found between TiB2 and TiB2 particles. It is shown that copper improves the densification behavior during combustion synthesis, compared with synthesized pure TiB2 ceramic. Due to the addition of copper, the relative density, bend strength and fracture toughness of TiB2–Cu composite are much higher than those of TiB2 ceramic. Crack-tip plastic blunting by a ductile metallic phase and crack deflection by the stress due to the difference of thermal expansion coefficient and elastic modulus between TiB2 and Cu are the principal mechanisms of toughness improvement of TiB2–Cu composite.

Combustion Synthesis of Ti(C,N)-TiB_2 Composite Powders under Super Gravity Conditions

Combustion synthesis of Ti(C, N) TiB2 composite powders under super gravity conditions

Combustion Synthesis of Ti<sub>3</sub>SiC<sub>2</sub>/TiC Composites from Elemental Powders under High-Gravity Conditions

Combustion Synthesis of TiCxN1−x–TiB2 Ceramic Composites in a High-Gravity Field

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

Combustion synthesis of Ti3SiC2 under high-gravity condition

Combustion synthesis of porous TiC/Ni composites under high gravity

Microstructure Transformation and Mechanical Properties of TiC–TiB2 Ceramics Prepared by Combustion Synthesis in High Gravity Field

Large-scale (Ti,Cr)B2-Cu composite by combustion synthesis

Large-Scale Solidified Tib2-(Ti,W)C Composite Ceramics Prepared By Combustion Synthesis Under High Gravity

Combustion Synthesis of Ti(C,N) Powder

Preparation and characterization of TiB2-Al2O3 composite powder by combustion synthesis process

Effect of reactant Ti/B4C ratio on the stoichiometry and mechanical properties of h-BN–Ti(C,N) prepared by combustion synthesis

Combustion Synthesis of TiB2-TiC/42CrMo4 Composites with Gradient Joint Prepared in Different High-Gravity Fields

Large-Scale (Ti,Cr)B<sub>2</sub>-Cu Composite by Combustion Synthesis

Microstructure Modification and Fracture Behavior of Solidified TiC–TiB2 Ceramic Prepared by Combustion Synthesis in Ultra-High Gravity Field

Combustion Synthesis and Densification of Titanium Diboride–copper Matrix Composite

PREPARATION OF TIB2/TIC CERAMIC COMPOSITES BY HIGH-GRAVITY COMBUSTION SYNTHESIS

Preparation of Tib2 Nanoparticles Reinforced Cu-Matrix Composite by Direct Combustion Synthesis

Microstructures and Toughening of TiC-TiB2Ceramic Composites with Cr-Based Alloy Phase Prepared by Combustion Synthesis in High-Gravity Field