Abstract:Using biomass for partial replacement of coke breeze in iron-ore sintering process is an effective technique as a countermeasure against global warming. However, the sinter strength would be weakened due to the damaged heat pattern at high biomass proportion. In this paper, the gaseous fuel injection method was experimentally investigated with the aim at solving this problem. Eleven cases were arranged to examine the ultra-low concentration of methane combustion and its effect on the improvement of heat pattern at high charcoal proportion. The temperature in the sintering bed was recorded by both thermocouples and infrared thermography. The thermocouple data indicated that the melt quantity index was significantly increased by employing the gaseous fuel injection method. Moreover, the infrared images show that the red-hot region was expanded at each moment in the methane injection cases. The influencing mechanism of gaseous fuel injection on the heat pattern in sintering process was revealed in this paper. As the premixed methane/air approaching to the solid fuel combustion zone, it was preheated by the hot sintered ores, then ignited and self-sustained near the solid fuel combustion zone. A newly generated gaseous fuel combustion zone coupled with the solid fuel combustion zone was used to control the heat pattern in sintering bed. The results showed that the heat pattern and sinter strength kept increasing until the methane concentration increased to 0.4–0.5% under the lab conditions. The stable interval of secondary combustion zone in the sintering bed was also analyzed. Finally, comprehensively considering the sinter strength, yield, productivity and sintering time, the recommended equivalent methane concentration at high charcoal proportion was 0.5% where the shatter strength grew 3.78% and solid fuel rate reduced 7.52%, compared with 100% coke sintering case. Generally, the gaseous fuel injection offers a technical support for the iron ore sinter production using cheap or carbon neutral solid fuel. More importantly, this method can also reduce solid fuels (the main contributor of contamination dust during the production, transportation and storage) consumption by partial substitution of cleaner gaseous fuel.

Characteristic and Mechanistic Study of Enhanced Carbon-Based Synfuel from Biomass and Coal by Magnetite Additive for Synergistic Co-Carbonization Technology.

Synthesis and Characteristics of Carbon-Based Synfuel from Biomass and Coal Powder by Synergistic Co-Carbonization Technology

Enhanced Combustion of Bituminous Coal and Semicoke Mixture by Ferric Oxide with Thermographic and Kinetic Analyses

Combustion Kinetics Characteristics of Solid Fuel in the Sintering Process

Synthesis, characterization and adsorption capacity of magnetic carbon composites activated by CO2: implication for the catalytic mechanisms of iron salts

A universal synthesis strategy for facile and scalable of magnetic biochar composite materials for PMS activation: catalytic mechanisms

Industrial Waste and Biomass Charcoal Composite Fuel for Iron Ore Sintering: Harmless Disposal of Waste and Carbon Reduction

Synergistic Effect for Co-Coking of Sawdust and Coal Blending Based on the Chemical Structure Transformation

Catalytic and Non-Catalytic Synergistic Effects and Their Individual Contributions to Improved Combustion Performance of Coal/biomass Blends

Thermodynamics and synergistic effects on the co-combustion of coal and biomass blends

Role of biochar-based catalysts in microwave-induced biomass pyrolysis: Structural properties and modification with Fe-series metals

Study on the feasibility and co-combustion mechanism of mixed injection of biomass hydrochar and anthracite in blast furnace

Synthesis, stability, and emission analysis of magnetite nanoparticle-based biofuels

Coal char gasification for co-production of fuel gas and methane decomposition catalysts

Catalytic Influence of Iron Oxide (fe2o3) on Coal Pyrolysis and Char Combustion at Various Temperatures

Investigation of the Characteristics of Catalysis Synergy During Co-Combustion for Coal Gasification Fine Slag with Bituminous Coal and Bamboo Residue

Multiple synergistic effects exerted by coexisting sodium and iron on catalytic steam gasification of coal char

Improvement of Heat Pattern and Sinter Strength at High Charcoal Proportion by Applying Ultra-Lean Gaseous Fuel Injection in Iron Ore Sintering Process

Investigation on co-combustion of coal gasification fine slag residual carbon and sawdust char blends: Physiochemical properties, combustion characteristic and kinetic behavior

Effects of Iron Minerals Embedded in Coal with Different Methods on the Distribution of Pyrolysis Products and the Gasification Reactivity of Its Pyrolysis Char

Synergistic Co-Combustion of Carbon-Rich Fraction from Coal Gasification Fine Slag and Corncob Char: Performance, Mechanism, Kinetics, and Thermodynamics