Abstract:The creation of new compounds featuring high adsorption and catalytic performance with magnetic properties of the material is one of the important fields of magnetochemistry. The typical synthetic schemes of magnetic carbonaceous adsorbents are rather complicated due to the use of inert atmosphere and difficult wet methods of magnetite precipitation. The arising experimental issues prevent industrial production of magnetically activated carbons. In order to overcome these obstacles, we suggested a novel approach to porous carbons: magnetite composite synthesis based on iron (II) salt precipitation on porous carbon and subsequent thermolysis. We facilitated the process at the stage of the material washing. The synthetic route used is simple and can be applied industrially. The present paper is focused on the adsorption performance of a product prepared from commercial activated carbons BAU-A and AG-3. The porous structure was studied with low-temperature nitrogen adsorption that revealed surface area decreased by 26% in the case of BAU-A and 40% in the case of AG-3 with an increase in mesopore volume. Phenol and nitrobenzene adsorption from water solution was tested with magnetic carbon prepared from BAU-A. The adsorption isotherms obtained are described well using the Langmuir model. The limiting adsorption value in the case of magnetic porous carbon is lower than in the case of pristine carbon. The relative decrease in limiting adsorption value is close to the relative decrease in the specific surface area. The adsorption constant remains the same, showing that adsorption centers of phenol and nitrobenzene are the same for porous magnetic carbon and its activated carbon precursor. Thus, we showed in the present study that the magnetically activated carbons we developed almost retain the adsorption performance of their activated carbon precursors.

Synthesis, characterization and adsorption capacity of magnetic carbon composites activated by CO2: implication for the catalytic mechanisms of iron salts

Controllable synthesis of magnetic carbon composites with high porosity and strong acid resistance from hydrochar for efficient removal of organic pollutants: An overlooked influence

Micro-structure, Surface Properties and Adsorption Capacity of Ball-Milled Cellulosic Biomass Derived Biochar Based Mineral Composites Synthesized Via Carbon-Bed Pyrolysis

Characteristic and Mechanistic Study of Enhanced Carbon-Based Synfuel from Biomass and Coal by Magnetite Additive for Synergistic Co-Carbonization Technology.

Co/N co-doped carbonaceous polyhedron as efficient peroxymonosulfate activator for degradation of organic pollutants: Role of cobalt

Facile Fabrication of Magnetic Carbon Composites from Hydrochar Via Simultaneous Activation and Magnetization for Triclosan Adsorption.

A universal synthesis strategy for facile and scalable of magnetic biochar composite materials for PMS activation: catalytic mechanisms

Magnetic coal gangue-based catalysts for peroxymonosulfate activation and benzo[ a ]pyrene degradation: The construction of Fe and N dual active sites

One-step Preparation of Coal-based Magnetic Activated Carbon with Hierarchically Porous Structure and Easy Magnetic Separation Capability for Adsorption Applications

Spatial confinement of cobalt crystals in carbon nanofibers with oxygen vacancies as a high-efficiency catalyst for organics degradation

Magnetic CoFe alloy–Co supported on mesoporous carbon as an efficient catalyst for the degradation of bensulfuron-methyl: insight into the effect of calcination temperature on carbon defects and singlet oxygen

The Adsorption Performance of Porous Activated Carbons Prepared from Iron (II) Precursors Precipitated on the Porous Carbon Matrix Thermolysis

Production, characteristics and use of magnetic biochar nanocomposites as sorbents

Removal of malachite green by cobalt@iron-doped porous carbon composite derived from CoFe-MOF and bamboo pulp black liquor

One-step preparation of environment-oriented magnetic coal-based activated carbon with high adsorption and magnetic separation performance

Sustainable efficient utilization of magnetic porous biochar for adsorption of orange G and tetracycline: Inherent roles of adsorption and mechanisms

Adsorption Mechanisms and Optimal Production of Magnetic Biochar Composites from Red Mud and Soft Wood Biomass

Synthesis of magnetic biochar with high iron content and large specific surface area: Synergistic effect of Fe doping and KOH activation

Novel Hybrid Composites Based on HKUST-1 and a Matrix of Magnetite Nanoparticles with Sustainable Materials for Efficient CO2 Adsorption

Assembly of core-shell Fe3O4 @CD-MOFs derived hollow magnetic microcubes for efficient extraction of hazardous substances: Plausible mechanisms for selective adsorption

Effects of Iron Minerals Embedded in Coal with Different Methods on the Distribution of Pyrolysis Products and the Gasification Reactivity of Its Pyrolysis Char