Abstract:Maintaining breathable air in human space flight missions is a challenge since there will be a gradual increase in the concentration of CO 2 due to the exhalation of the spacecraft crew. Modern air revitalization technology for space missions uses temperature swing adsorption with zeolite-based materials as the adsorbent. However, the major drawbacks of zeolites are difficulty in regenerating used adsorbent and low selectivity towards CO 2 . Besides, frequent replacement of adsorption beds is necessary because of their low adsorption capacity towards CO 2 . This requires carrying a few spare beds in the spacecraft, which is not preferred because of the low-weight requirements for space missions. Hence, shifting to alternate materials with more selectivity and adsorption capacity toward CO 2 becomes essential. Metal-organic frameworks (MOFs) are a class of crystalline materials found to be potential adsorbents for CO 2 capture. Due to their ultra-high porosity, tunable pore characteristics, selective capture, and synergistic performance, they could replace the existing zeolite-based adsorbents. Further enhancement in the adsorption capacity could be achieved by introducing a secondary metal into the framework. This will bring heterogeneity in the structure, creation of defects, and open metal sites, thus enhancing the adsorption behavior. Incorporating a secondary metal into the framework and an additional filler material like activated carbon, making a BMOF composite, would lead to an exemplary improvement in the adsorption activity. The addition of filler material will lead to an increase in pore volume, which will enhance the adsorption capacity. In the current work, activated carbon was synthesized from sawdust via chemical activation method using KOH as the activating agent. It was carried out at low temperatures to boost the porous structure formation. Then the composite of Cu-Ni bimetallic MOF with activated carbon was prepared through one-pot solvothermal synthesis. The incorporation of activated carbon created an additional number of pores in the system leading to enhanced adsorption. N 2 adsorption-desorption analysis was carried out to find the surface area. The results showed that the surface area of activated carbon and Cu-Ni-Activated carbon BMOF composite was found to be 576 m 2 /g and 1321 m 2 /g, respectively. The analysis also revealed the presence of microporous system in the material. Several characterization techniques, such as IR, SEM, XRD etc., were used to study morphology and characteristic features. The SEM shows that the incorporation of nickel and activated carbon have made a profound modification on the octahedral morphology of copper. CO 2 adsorption studies were carried out at 1 bar, 25°C. The BMOF composite adsorbent was found to adsorb ~4.52 mmol/g of CO 2 whereas the as-synthesized activated carbon and ZSM-5 were found to adsorb ~2.71 mmol/g and ~1.68 mmol/g respectively. To understand the level of microporosity in the supermicropores range, CO 2 adsorption analysis at 1 bar and 0°C was carried out since N 2 adsorption at -196°C have limitations due to kinetic diffusion related problems at low temperatures. It revealed a micropore volume (<1.066nm) of 0.252 cm 3 /g and a pore size range of 4-10 angstroms, which is ideal for selective CO 2 adsorption. Also, the BMOF composite was found to adsorb ~8.27 mmol/g at 0°C, which showed that adsorption capacity increases with a decrease in temperature. Hence, the BMOF composites could serve as a promising adsorbent for selective CO 2 capture. Figure 1

Novel Hybrid Composites Based on HKUST-1 and a Matrix of Magnetite Nanoparticles with Sustainable Materials for Efficient CO2 Adsorption

Why Porous Materials Have Selective Adsorptions: A Rational Aspect from Electrodynamics.

Bimetallic Metal Organic Framework Composites for Carbondioxide Capture

Surface Tunable Magnetic Nano-Sorbents for Carbon Dioxide Sorption and Separation

Defect-controlled confined growth of nano-MOFs to prepare materials with hierarchical micro/mesoporous structures for efficient CO 2 capture

Synthesis, characterization and adsorption capacity of magnetic carbon composites activated by CO2: implication for the catalytic mechanisms of iron salts

Synthesis of Hierarchical Porous Carbon Monoliths with Incorporated Metal–Organic Frameworks for Enhancing Volumetric Based CO2 Capture Capability

CO 2 Adsorption on Nanocomposite Pollen-Derived Carbons: Synergic Effect of KOH Activation and MgO Incorporation

A Novel Strategy to Enhance the Performance of CO2 Adsorption Separation: Grafting Hyper-cross-linked Polyimide onto Composites of UiO-66-NH2 and GO

Nanoarchitectured composite of polysulfone and carbon-based fillers bearing magnetically stimulable function for efficient CO2 capture

Green fabrication of cost-effective and sustainable nanoporous carbons for efficient hydrogen storage and CO 2 /H 2 separation

Rapid microwave synthesis of sustainable magnetic framework composites of UTSA-16(Zn) with Fe3O4 nanoparticles for efficient CO2 capture

MOF-derived bimetallic coordination polymer@cobalt-aluminum layered double hydroxide for highly selective CO2 adsorption: Experiments, mechanisms

Synthesis of Hierarchically Structured Hybrid Materials by Controlled Self-Assembly of Metal-Organic Framework with Mesoporous Silica for CO 2 Adsorption.

MOF-derived bimetallic coordination polymer@cobalt-aluminum layered double hydroxide for highly selective CO<sub>2</sub> adsorption: Experiments, mechanisms

Resistant, stable HKUST@MC composite for highly-efficient gas adsorptive desulfurization

Investigation on cost-effective composites for CO2 adsorption from post-gasification residue and metal organic framework

Magnetic Porous Carbons with High Adsorption Capacity Synthesized by a Microwave-Enhanced High Temperature Ionothermal Method from a Fe-based Metal-Organic Framework

Facile Preparation of Magnetic Composites Based on Carbon Nanotubes: Utilization for Removal of Environmental Pollutants.

A novel combining strategy of cellulose aerogel and hierarchically porous metal organic frameworks (HP-MOFs) to improve the CO2 absorption performance

Superparamagnetic MOF@GO Ni and Co based hybrid nanocomposites as efficient water pollutant adsorbents