Abstract:The creation of new compounds featuring high adsorption and catalytic performance with magnetic properties of the material is one of the important fields of magnetochemistry. The typical synthetic schemes of magnetic carbonaceous adsorbents are rather complicated due to the use of inert atmosphere and difficult wet methods of magnetite precipitation. The arising experimental issues prevent industrial production of magnetically activated carbons. In order to overcome these obstacles, we suggested a novel approach to porous carbons: magnetite composite synthesis based on iron (II) salt precipitation on porous carbon and subsequent thermolysis. We facilitated the process at the stage of the material washing. The synthetic route used is simple and can be applied industrially. The present paper is focused on the adsorption performance of a product prepared from commercial activated carbons BAU-A and AG-3. The porous structure was studied with low-temperature nitrogen adsorption that revealed surface area decreased by 26% in the case of BAU-A and 40% in the case of AG-3 with an increase in mesopore volume. Phenol and nitrobenzene adsorption from water solution was tested with magnetic carbon prepared from BAU-A. The adsorption isotherms obtained are described well using the Langmuir model. The limiting adsorption value in the case of magnetic porous carbon is lower than in the case of pristine carbon. The relative decrease in limiting adsorption value is close to the relative decrease in the specific surface area. The adsorption constant remains the same, showing that adsorption centers of phenol and nitrobenzene are the same for porous magnetic carbon and its activated carbon precursor. Thus, we showed in the present study that the magnetically activated carbons we developed almost retain the adsorption performance of their activated carbon precursors.

One-step Preparation of Coal-based Magnetic Activated Carbon with Hierarchically Porous Structure and Easy Magnetic Separation Capability for Adsorption Applications

One-step preparation of environment-oriented magnetic coal-based activated carbon with high adsorption and magnetic separation performance

Synthesis of magnetic activated carbons from black liquor lignin and Fenton sludge in a one-step pyrolysis for methylene blue adsorption

Synthesis, characterization and adsorption capacity of magnetic carbon composites activated by CO2: implication for the catalytic mechanisms of iron salts

Solvent-free synthesis of magnetic biochar and activated carbon through ball-mill extrusion with Fe3O4 nanoparticles for enhancing adsorption of methylene blue

Preparation of micro-porous monolithic activated carbon from anthracite coal using coal tar pitch as binder

Mechanochemistry coupled with MgCO3 one-step activation to prepare coal-based hierarchical porous carbon for supercapacitors

Characteristic and Mechanistic Study of Enhanced Carbon-Based Synfuel from Biomass and Coal by Magnetite Additive for Synergistic Co-Carbonization Technology.

Synthesis of micro-mesoporous hierarchical structure of coal-based activated carbon and its effect on methane adsorption

One-step synthesis of magnetic asphalt-based activated carbon with high specific surface area and adsorption performance for methylene blue

Rapid preparation of porous carbon by Flash Joule heating from bituminous coal and its adsorption mechanism of methylene blue

Preparation of an activated carbon involving magnetic properties

Influence of Tectonically Deformed Coal-Based Activated Carbon and Its Surface Modification on Methane Adsorption

Preparation of magnetic activated carbon fibers@Fe3O4 by electrostatic self-assembly method and adsorption properties for methylene blue

Preparation of ultramicroporous volume carbon using high-speed ball-milling and its selective adsorption of CH4 in low-concentration coalbed methane

Controllable synthesis of magnetic carbon composites with high porosity and strong acid resistance from hydrochar for efficient removal of organic pollutants: An overlooked influence

Low-Temperature Solvothermal Method for Coal Tar-Based Carbonaceous Mesophase Preparation and Its Excellent Performance

The Adsorption Performance of Porous Activated Carbons Prepared from Iron (II) Precursors Precipitated on the Porous Carbon Matrix Thermolysis

Preparation of magnesium carbonate hydroxide microsheets modified activated carbon fiber and its adsorption of heavy metals

Adsorption performance of mineral-carbon adsorbents derived from coal gasification fine ash: Prepared via low-temperature alkali fusion method

Tuning porosity of coal-derived activated carbons for CO2 adsorption