Preparation of ultramicroporous volume carbon using high-speed ball-milling and its selective adsorption of CH4 in low-concentration coalbed methane

Chen Huang,Meng Han,Li Zhang,Wei Dang,Lan Luo,Yongyong Shi,Chunliang Yang,Meng Wang,Hongyan Pan,Qian Lin
DOI: https://doi.org/10.1007/s10853-022-07078-y
IF: 4.5
2022-03-24
Journal of Materials Science
Abstract:Reasonable design of adsorbents for separating and purifying CH4 in coalbed methane is important to achieve sustainable development. However, KOH activation, the most widely used method for preparing activated-carbon adsorbents, requires the addition of a high proportion of KOH, which has disadvantages such as high cost and corrosion. In this study, a low proportion of KOH/KMnO4 is used as an activator and a mechanical ball-milling method is used to prepare cellulose-based microporous carbon for the selective adsorption of CH4 in low-concentration coalbed methane. The prepared microporous carbon has a large ultramicropore volume and narrow pore size distribution. The Vmic (<1 nm) of ACQ60 is 0.39 cm3/g, and the most probable pore size is 0.42 nm. At 273 K and 101.3 kPa, the CH4 adsorption capacity of this sample is up to 3.22 mmol/g. Ideal adsorption solution theory simulations show that CH4/N2 selectivity is 7.82. The ACQ60 regeneration adsorption performance was evaluated via a dynamic penetration experiment. After six cycles, the CH4 penetration time difference was found to be minor. This study serves as a reference for the excellent performance of carbon materials with rich narrow microporous structures applied to the effective separation of CH4 in low-concentration coalbed methane.
materials science, multidisciplinary
What problem does this paper attempt to address?