Abstract:Coal-based activated carbon is an ideal adsorbent for concentrating CH4 from coalbed methane and recovering CO2 from industrial waste gas. In order to upgrade the environmentally protective preparation technology of coal-based activated carbons and clarify the adsorption equilibrium and diffusion rules of CH4, CO2, and N2 in these materials, we prepared granular activated carbon (GAC) via air oxidation, carbonization, and physical activation using anthracite as the raw material. Also, we measured the adsorption isotherms and adsorption kinetic data of GAC by the gravimetric method and characterized its surface chemical properties. According to the results, GAC had abundant micropore structures with a pore size mainly in the range of 5.0-10.0 Å, and its surface was covered with plentiful oxygen-containing functional groups. The specific pore structure and surface chemical properties could effectively improve the separation and purification effects of GAC on CH4 and CO2. In the temperature range of 278-318 K, the equilibrium separation of CH4/N2 by GAC with a coefficient between 3 and 4 could be achieved. Also, the CO2/CH4 separation coefficient decreased with the increase in temperature but remained around 3. The bivariate Langmuir equation could describe the adsorption behaviors of GAC on CH4/N2, CO2/N2, and CH4/CO2. With the increase in the concentrations of CH4 and CO2 in the gas phase, the difference between the adsorption capacity of CH4 or CO2 and that of N2 became greater. The change of the gas ratio did not affect the characteristics of preferential adsorption of CH4 and CO2. At different temperatures (278, 298, and 318 K), the diffusion coefficients of CH4, N2, and CO2 at various pressure points showed predominately a small variation without an obvious trend. These results demonstrated that the separation of CH4/N2, CO2/N2, and CH4/CO2 by the activated carbon could only rely on the equilibrium separation effect rather than the kinetic effect.

Ultramicroporous carbon granules with narrow pore size distribution for efficient CH 4 separation from coal‐bed gases

Carbon nanofibers with gas selective layer containing rich and accessible ultramicropores for methane/nitrogen separation

Preparation of ultramicroporous volume carbon using high-speed ball-milling and its selective adsorption of CH4 in low-concentration coalbed methane

New insight into efficient CH4/N2 separation based on Ni-decorated porous carbon functional composites

Enhancement of CH 4 /N 2 separation capacity of coal-based porous carbons via hydrothermal coupled KOH activation

Ultramicroporous Carbon with Extremely Narrow Pore Distribution and Very High Nitrogen Doping for Efficient Methane Mixture Gases Upgrading

A Stable Cu(I)-Based Ultramicroporous NKMOF-8-Br with High CH 4 Uptake for Efficient Separation of CH 4 /N 2 Mixtures

Rational design of carbon materials with tailored pore structure for efficient separation of CH 4 /N 2 mixture

Novel zeolite/carbon monolith adsorbents for efficient CH4/N2 separation

Preparation of Activated Carbon Doped with Graphene Oxide Porous Materials and Their High Gas Adsorption Performance

Microporous Carbon Adsorbents Prepared by Activating Reagent-Free Pyrolysis for Upgrading Low-Quality Natural Gas

A thermally stable isoquinoline based ultra-microporous metal-organic framework for CH4 separation from coal mine methane

Fabricating a Robust Ultramicroporous Metal‐Organic Framework for Purifying Natural Gas and Coal Mine Methane

Influence of pore structure of granular activated carbon prepared from anthracite on the adsorption of CO2, CH4 and N2

Adsorption Equilibrium and Diffusion of CH4, CO2, and N2 in Coal-Based Activated Carbon

Superhydrophobic zeolitic imidazolate framework with suitable SOD cage for effective CH 4 / N 2 adsorptive separation in humid environments

The impact of effective pore percentage on CH4/N2 separation in coal-based activated carbon

Extract Propane and Ethane from Methane on Ultramicroporous Carbon Adsorbent with Record Selectivity

Novel Granular Biomass-Based Carbons with Excellent C 2 H 6 /CH 4 Selectivity for Recovering Light Hydrocarbons from Natural Gas

Self-Pillared Ultramicroporous Carbon Nanoplates for Selective Separation of CH4 /N2

Nickel-Based Metal-Organic Frameworks for Coal-Bed Methane Purification with Record CH4/N2 Selectivity.