Abstract:The separation of methane (CH 4 ) from industrially–important nitrogen (N 2 )-rich vent streams such as those in liquefied natural gas processing plants is challenging. Pressure swing adsorption (PSA) is a promising, cost–effective solution in gas separation, especially for small–scale units. Further development and commercialisation of PSA–based technologies requires access to low–cost, selective adsorbent materials. The current work investigates the improved separation of CH 4 from N 2 by TMA–Y zeolite which is obtained from the ion exchange treatment of Na–Y zeolite with the ammonium salt tetramethylammonium chloride (TMACl). TMA–Y is commercially called Ionic Liquidic Zeolite (ILZ), patented at The University of Western Australia, and has now been demonstrated in tonne–scale. In particular, we use a combination of experimental and molecular simulation techniques to provide insights into the high CH 4 –over–N 2 selectivity of TMA–Y. For this, we obtain equilibrium isotherms of CH 4 and N 2 on Na–Y at different temperatures and pressures before and after ion exchange. The true selectivities of the zeolite samples are determined using the Ideal Adsorbed Solution Theory (IAST) and binary–gas grand–canonical Monte Carlo (GCMC) molecular simulations. From experiments and IAST calculations, we report an increase of > 110 % in the CH 4 /N 2 selectivity of Na–Y after treatment with TMACl (from 2.2 to 4.7 at 5.0 MPa and 303.15 K for a mixture of 0.1 CH 4 + 0.9 N 2 mol.mol −1 ). GCMC molecular simulations provide a detailed picture of the molecular origins of this effect. Specifically, the introduction of TMA + ions into the structure of Na–Y zeolite leads to a reduction of the available adsorption volume more than 40 % (from 0.30 to 0.17 cm 3 .g −1 with N 2 as the probe molecule) for both adsorbing gas species (i.e. CH 4 and N 2 ). However, at the same time, this leads to stronger CH 4 –cation interactions due to much higher affinity of TMA + cations (5 kJ.mol −1 ) than extra–framework Na + cations (1 kJ.mol −1 ) towards CH 4 . The overall effect of these two trends combined is the higher selectivity of the resulting TMA–Y zeolite for CH 4 . These molecular insights are useful in the systematic engineering of new materials with improved separation performance.

Novel zeolite/carbon monolith adsorbents for efficient CH4/N2 separation

Down-sizing the crystal size of ZK-5 zeolite for its enhanced CH4 adsorption and CH4/N2 separation performances

Enhancement of CH 4 /N 2 separation capacity of coal-based porous carbons via hydrothermal coupled KOH activation

Superhydrophobic zeolitic imidazolate framework with suitable SOD cage for effective CH 4 / N 2 adsorptive separation in humid environments

Carbon nanofibers with gas selective layer containing rich and accessible ultramicropores for methane/nitrogen separation

New insight into efficient CH4/N2 separation based on Ni-decorated porous carbon functional composites

Rational Synthesis of Chabazite (CHA) Zeolites with Controlled Si/Al Ratio and Their CO2 /CH4 /N2 Adsorptive Separation Performances

Separation of methane and nitrogen using ionic liquidic zeolites by pressure vacuum swing adsorption

Evaluation of CH 4 /N 2 Separation Performances on Ultra-microporous FDCA-Based MOFs Using Experimental and Numerical Methods

Using ligand regulation, metal replacement, and ligand doping strategies on Zr-FUM to improve methane separation from coalbed gas

Incorporation of Lewis basic sites into Zn‐pyrazolate frameworks for efficient methane/nitrogen separation

Large‐area vacuum‐treated ZIF‐8 mixed‐matrix membrane for highly efficient methane/nitrogen separation

Improving separation of CH 4 and N 2 by adsorption on zeolite Y Ion–Exchanged with ammonium Cations: An experimental and Grand–Canonical Monte Carlo (GCMC) simulation investigation

Microstructure effect of carbon materials on the low-concentration methane adsorption separation from its mixture with nitrogen

Enhanced CH4/N2 Separation Efficiency of UiO-66-Br2 through Hybridization with Mesoporous Silica

Synthesis of nanosized IM-5 zeolite and its CH4/N2 adsorption and separation

Rational design of carbon materials with tailored pore structure for efficient separation of CH 4 /N 2 mixture

Adsorption and separation of CH4/N2 by electrically neutral skeleton AlPO molecular sieves

A Stable Cu(I)-Based Ultramicroporous NKMOF-8-Br with High CH 4 Uptake for Efficient Separation of CH 4 /N 2 Mixtures

Adjusting the Si/Al ratio of high silica zeolites for efficient ethane and ethylene separation

Adsorption separation of carbon dioxide, methane and nitrogen on monoethanol amine modified β-zeolite