Abstract:The separation of methane (CH4) and nitrogen (N2) is a significant challenge to the enrichment and utilization of low concentration CH4 due to the similarity in the physical and chemical properties of the two molecules. In this work, we investigated the separation of CH4 from N2 using 100 kg of a new ionic liquidic zeolite (ILZ) material in a 6‐bed pilot‐scale pressure swing adsorption process. Feed gases with CH4 concentrations of 5.0% and 16.1% were upgraded to 11.5% and 34.6%, respectively, with CH4 recoveries higher than 80%. The pilot test results were used to anchor a numerical model that then allowed the efficient investigation of multiple operational parameters including desorption pressure and feed gas flow rates. The numerical model produced CH4 concentrations for both product streams consistent with those measured in the pilot experiments, with root mean square deviations below 2%. The modeling results revealed that sufficiently low desorption pressures can unexpectedly lead to lower heavy product purities under limited feed gas flow conditions. Furthermore, the optimum feed gas flow rate under which maximum heavy product purity is achieved increases with lower desorption pressure. The maximum CH4 concentrations increased from 31.8% to 41.5%, as desorption pressures decreased from 22.8 to 12.2 kPa for optimum feed flow rates between 78.2 and 105.5 mol/h. We also demonstrate a method of process optimization based on the bed capacity ratio, ℂ, which provides a scale‐independent measure of the degree to which the column is being used effectively. By varying feed flow rate and/or desorption pressure, ℂ values between 0.2 and 0.8 were explored, with maxima in the combined separation performance metric (methane recovery) × (methane purity) occurring for values of ℂ in the range 0.29–0.36. This separation performance optimization by adjusting ℂ provides an effective strategy for integrating and understanding the impact of multiple operating parameters.

Incorporation of Lewis basic sites into Zn‐pyrazolate frameworks for efficient methane/nitrogen separation

Anion Pillared Metal–Organic Framework Embedded with Molecular Rotors for Size-Selective Capture of CO2 from CH4 and N2

Molecular simulation study of metal organic frameworks for methane capture from low-concentration coal mine methane gas

Zr-Based Metal–Organic Framework with Wall-Shared Dual Ultramicroporous Channels for Effective CH4/N2 Separation

Highly Efficient Separation of Methane from Nitrogen on a Squarate‐based Metal‐organic Framework

Novel zeolite/carbon monolith adsorbents for efficient CH4/N2 separation

Nickel-Based Metal-Organic Frameworks for Coal-Bed Methane Purification with Record CH4/N2 Selectivity.

Heteroatom-doped Porous Carbon Microspheres with Ultramicropores for Efficient CH4/N2 Separation with Ultra-High CH4 Uptake

Improving CH4 uptake and CH4/N2 separation in pillar‐layered MOFs using a regulating strategy of interlayer channels

Mechanochemical synthesis of a robust cobalt-based metal–organic framework for adsorption separation methane from nitrogen

Robust Nickel-Based Metal–Organic Framework for Highly Efficient Methane Purification and Capture

Using ligand regulation, metal replacement, and ligand doping strategies on Zr-FUM to improve methane separation from coalbed gas

A thermally stable isoquinoline based ultra-microporous metal-organic framework for CH4 separation from coal mine methane

Hydrogen-bonded metal-nucleobase frameworks for highly selective capture of ethane/propane from methane and methane/nitrogen separation

Separation of methane and nitrogen using ionic liquidic zeolites by pressure vacuum swing adsorption

Novel Hydrogen-Bonded Metal-Nucleobase Frameworks for Highly Selective Capture and Separation of Ethane/Propane and Nitrogen from Methane

Superhydrophobic zeolitic imidazolate framework with suitable SOD cage for effective CH 4 / N 2 adsorptive separation in humid environments

Carbon nanofibers with gas selective layer containing rich and accessible ultramicropores for methane/nitrogen separation

A Stable Cu(I)-Based Ultramicroporous NKMOF-8-Br with High CH 4 Uptake for Efficient Separation of CH 4 /N 2 Mixtures

One Scalable and Stable Metal-Organic Framework for Efficient Separation of CH 4 /N 2 Mixture

A dense 3d-4f metal-organic framework with "gas pocket" for highly efficient CH4/N2 separation