Abstract:Four electrically neutral framework porous (AlPO) molecular sieves, UiO-7, AlPO4-33, AlPO4-17, and AlPO4-18, as all-silicon molecular sieve isoelectronic analogues, have been synthesized and studied with regard to their performance in CH4/N2 adsorption and separation. Experimental results have shown that UiO-7, with the topological type ZON, has the lowest Brunauer–Emmett–Teller (BET) surface area, but exhibits the highest CH4 adsorption capacity of 0.82 mmol/g and the highest adsorption selectivities of 4.4 (50:50, v/v) and 4.2 (20:80, v/v) among the four materials. BET surface area has been evaluated from N2 adsorption and desorption isotherms at 77 K, and the average pore sizes of the four materials have been calculated on the basis of a density functional theory (DFT) model. Interestingly, the CH4 adsorption capacity and adsorption selectivity have been found to first increase and then decrease with increasing average pore size of the four AlPO materials (AlPO4-18: 0.56 nm, AlPO4-17: 0.69 nm, UiO-7: 0.77 nm, AlPO4-33: 0.88 nm). Compared with the data of activated carbon material that also has no surface adsorption sites, it is found: They were maximized when the average pore size of the adsorbent was close to 0.76 nm (diameter of CH4, 0.38 nm). Theoretical calculations revealed that the suitable pore size of UiO-7, match better with CH4 to provide stronger binding energy with CH4 than other selected materials. And this result is verified by GCMC simulation. Thus, we infer that this is why UiO-7 shows the highest CH4 selectivity. Mixed-gas breakthrough experiments and PSA simulations have further proved that UiO-7 may be used for CH4/N2 adsorption separation, and indeed is the best choice among the studied AlPO molecular sieves.

Adsorption and separation of CH4/N2 by electrically neutral skeleton AlPO molecular sieves

Anion Pillared Metal–Organic Framework Embedded with Molecular Rotors for Size-Selective Capture of CO2 from CH4 and N2

A Stable Cu(I)-Based Ultramicroporous NKMOF-8-Br with High CH 4 Uptake for Efficient Separation of CH 4 /N 2 Mixtures

Novel zeolite/carbon monolith adsorbents for efficient CH4/N2 separation

A robust calcium-based microporous metal-organic framework for efficient CH4/N2 separation

AlPO-18 Membranes for CO2/CH4 and N2/CH4 Separations

Enhanced CH4/N2 Separation Efficiency of UiO-66-Br2 through Hybridization with Mesoporous Silica

Adsorptive Separation of Methylalumoxane by Mesoporous Molecular Sieve MCM-41

Selective Adsorption of CH4/N2 on Ni-based MOF/SBA-15 Composite Materials

Simulation study on functional group‐modified Ni‐MOF‐74 for CH4/N2 adsorption separation

Selective Adsorption of CH<sub>4</sub>/N<sub>2</sub> on Ni-based MOF/SBA-15 Composite Materials

Highly Efficient Separation of Methane from Nitrogen on a Squarate‐based Metal‐organic Framework

Heteroatom-doped Porous Carbon Microspheres with Ultramicropores for Efficient CH4/N2 Separation with Ultra-High CH4 Uptake

Evaluation of CH 4 /N 2 Separation Performances on Ultra-microporous FDCA-Based MOFs Using Experimental and Numerical Methods

Research Progress in Microporous Materials for Selective Adsorption and Separation of Methane from Low-Grade Gas

MIL-101-Cr/Fe/Fe-NH2 for Efficient Separation of CH4 and C3H8 from Simulated Natural Gas

Adsorptive separation studies of ethane-methane and methane-nitrogen systems using mesoporous carbon.

Superhydrophobic zeolitic imidazolate framework with suitable SOD cage for effective CH 4 / N 2 adsorptive separation in humid environments

Kinetic separation of CO2/CH4 mixtures with Ni-MOF-74@Al2O3 core–shell composites

New insight into efficient CH4/N2 separation based on Ni-decorated porous carbon functional composites

Investigation of highly efficient adsorbent based on Ni-MOF-74 in the separation of CO2 from natural gas