Abstract:Separation of methane and nitrogen is an essential matter of concern in upgrading low-quality natural gases such as biogas, coalbed methane, shale gas, and so forth. However, similar weak polarities and the close kinetic diameter of methane and nitrogen make the separation of these two species very challenging. Considering that micropores play an extremely important role in adsorption selectivity, in this work, carbon adsorbents with homogeneous pore widths were controllably prepared from poly(vinylidene chloride) resins by activating reagent-free pyrolysis. Compared to traditional activated carbon prepared by pyrolysis with the presence of chemical reagents such as potassium hydroxide and zinc chloride, the obtained microporous carbon adsorbents are free of mesopores and macropores and demonstrate efficient separation of CH4 and N-2. These materials were comprehensively characterized by PXRD, SEM, TEM, TGA, XPS, Raman spectra, contact angle measurement, and water vapor adsorption. The synthesized carbon adsorbents have an ultrahigh specific surface area (>1100 m(2)) and a large micropore volume (>0.37 cm(3)/g). Adsorption performances of these materials were demonstrated by static adsorption tests and breakthrough experiments. The methane uptake up to 1.57 mmol/g at ambient conditions outperforms most top-performing adsorbents reported to date. Moreover, the optimal microporous carbon, denoted C-PVDC-700, exhibits the highest LAST selectivity (5.5-14.7 at 298 K) of methane over nitrogen. The facile preparation strategy, ultrahigh adsorption capacities, record-high selectivity, and robust stability guarantee that this material is promising for upgrading low-quality natural gas.

Microstructure effect of carbon materials on the low-concentration methane adsorption separation from its mixture with nitrogen

Research Progress in Microporous Materials for Selective Adsorption and Separation of Methane from Low-Grade Gas

Carbon nanofibers with gas selective layer containing rich and accessible ultramicropores for methane/nitrogen separation

Microporous Carbon Adsorbents Prepared by Activating Reagent-Free Pyrolysis for Upgrading Low-Quality Natural Gas

Ultramicroporous Carbon with Extremely Narrow Pore Distribution and Very High Nitrogen Doping for Efficient Methane Mixture Gases Upgrading

Methane separation and capture from nitrogen rich gases by selective adsorption in microporous Materials: A review

Preparation of ultramicroporous volume carbon using high-speed ball-milling and its selective adsorption of CH4 in low-concentration coalbed methane

Novel zeolite/carbon monolith adsorbents for efficient CH4/N2 separation

Influence of pore structure of granular activated carbon prepared from anthracite on the adsorption of CO2, CH4 and N2

Rational design of carbon materials with tailored pore structure for efficient separation of CH 4 /N 2 mixture

Synthesis of micro-mesoporous hierarchical structure of coal-based activated carbon and its effect on methane adsorption

Highly Efficient Separation of Methane from Nitrogen on a Squarate‐based Metal‐organic Framework

Elucidating the Separation Role of C3N Slit-pore on N2/CH4 in Coalbed Methane

New insight into efficient CH4/N2 separation based on Ni-decorated porous carbon functional composites

N-rich chitosan-derived porous carbon materials for efficient CO2 adsorption and gas separation

Enhanced N-doped Porous Carbon Derived from KOH-Activated Waste Wool: A Promising Material for Selective Adsorption of CO2/CH4 and CH4/N2

Improving Biogas Separation And Methane Storage With Multi Layer Graphene Nanostructure Via Layer Spacing Optimization And Lithium Doping: A Molecular Simulation Investigation

Water Resistant and Flexible MOF Materials for Highly Efficient Separation of Methane from Nitrogen

Evaluation of CH 4 /N 2 Separation Performances on Ultra-microporous FDCA-Based MOFs Using Experimental and Numerical Methods

Effect of pore size on CH4/N2 separation using activated carbon