Abstract:Developing an adsorbent with high adsorption capacity and high selectivity is of great importance for the post-combustion CO2 capture. Inspired by the theoretical calculation findings that the introduction of alkali metal atoms (e.g., Li, Na, and K) into the carbon framework can significantly increase the CO2 adsorption capacity through the enhanced electrostatic interaction, herein, we have successfully developed a series of alkali metal doped carbons through a simple and effective strategy. The systematic characterization results prove that alkali metals are uniformly introduced into the carbon framework without changing the pore size distribution and amorphous structure of the original material, but slightly reducing the specific surface area. The adsorption performances from the static adsorption and the dynamic breakthrough experiments with a binary mixture of CO2/N2 (15/85, v/v) reveal that the doping of alkali metals can greatly enhance the capture and separation of CO2, in which the lithium-doped porous carbon presents the best CO2 uptake of 4.1 mmol/g at 25 °C (48.3% higher than that of undoped carbon) with the highest CO2/N2 selectivity of 47 and fastest adsorption rate. The high adsorption capacity and selectivity presented are comparable to the data reported in the previous literature. The density functional theory and grand canonical Monte Carlo molecular simulation results demonstrate that, compared with N2, alkali metal doped carbon has a stronger binding energy and higher adsorption density for CO2 and thus increases the CO2/N2 selectivity to a greater extent. This proof-of-concept work paves an alternative way for the development of high-performance CO2 adsorbents.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c02313.Computational methodology; XPS O 1s spectra of the as-prepared samples; TEM mapping images; nitrogen adsorption isotherms collected at 25 °C; breakthrough curve for humid mixtures; DFT binding energy calculations; Freundich model fitted CO2 adsorption isotherms (PDF)This article has not yet been cited by other publications.

Enhanced N-doped Porous Carbon Derived from KOH-Activated Waste Wool: A Promising Material for Selective Adsorption of CO2/CH4 and CH4/N2

Sustainable Biomass Glucose-Derived Porous Carbon Spheres with High Nitrogen Doping: As a Promising Adsorbent for CO2/CH4/N2 Adsorptive Separation

An Efficient Biochar Adsorbent for CO2 Capture: Combined Experimental and Theoretical Study on the Promotion Mechanism of N-doping

N-rich chitosan-derived porous carbon materials for efficient CO2 adsorption and gas separation

Ultramicroporous Carbon with Extremely Narrow Pore Distribution and Very High Nitrogen Doping for Efficient Methane Mixture Gases Upgrading

Facile preparation of N-doped porous carbon and its CO2 gas adsorption performance

One-Pot Synthesis of N-Rich Porous Carbon for Efficient CO2 Adsorption Performance

Carbon nanofibers with gas selective layer containing rich and accessible ultramicropores for methane/nitrogen separation

Enhancement of CH 4 /N 2 separation capacity of coal-based porous carbons via hydrothermal coupled KOH activation

Microporous Carbon Adsorbents Prepared by Activating Reagent-Free Pyrolysis for Upgrading Low-Quality Natural Gas

Modulated Synthesis of N-doped Porous Carbons Via Rational Design of the Poly(ionic Liquid) Precursors Towards Efficient CO2 Separation

The fabrication of porous N-doped carbon from widely available urea formaldehyde resin for carbon dioxide adsorption

Synthesis of Alkali Metals Functionalized Porous Carbon for Enhanced Selective Adsorption of Carbon Dioxide: A Theoretically Guided Study

One-Pot Synthesis of Melamine Formaldehyde Resin-Derived N-Doped Porous Carbon for CO2 Capture Application

Dual‐Cation Activation of N‐Enriched Porous Carbons Improves Control of CO2 and N2 Adsorption Thermodynamics for Selective CO2 Capture

Tuning N-doping thermal-process enables biomass-carbon surface modification for potential separation effect of CO2/CH4/N2

A Stable Cu(I)-Based Ultramicroporous NKMOF-8-Br with High CH 4 Uptake for Efficient Separation of CH 4 /N 2 Mixtures

Adsorption Equilibrium and Diffusion of CH4, CO2, and N2 in Coal-Based Activated Carbon

N-doped porous carbon derived from macadamia nut shell for CO 2 adsorption

Investigation of highly efficient adsorbent based on Ni-MOF-74 in the separation of CO2 from natural gas

An economical-friendly biomass-based porous carbon with chitosan modification for the favorable adsorption of CO2 and toluene